On-line silicate analyzer

2019-08-04 10:02:30

Online Silicate Analyzer Online Silicate Detector Online Silicate Tester

Online Silicate Analyzer Online Silicate Detector Online Silicate Tester Typical Application

Power plant make-up water, boiler water, condensate, furnace water.

Online Silicate Analyzer Online Silicate Detector Online Silicate Tester

Instrument features

★ 1-6 channels can be selected to save costs

★ High measurement accuracy and fast response

★ can be automatically calibrated on a regular basis, and the maintenance workload is small

★ Color liquid crystal display real-time curve, easy to analyze operating conditions

★ Save one month of historical data for easy recall

★ Monochrome cold light source, long service life, good stability

★ Multiple high-precision programmable current signal output, suitable for

Follow-up automatic dosing or data acquisition system

Online Silicate Analyzer Online Silicate Detector Online Silicate Tester

Technical instructions

Measuring principle: Silicon-molybdenum blue photometric method

Measuring range: 0~200ug/L, 0~2000ug/L optional

Accuracy: ±1%FS

Reproducibility: ±1%FS

Stability: Drift ≤±1% FS/24 hours

Response time: Initial response 10 minutes

Sampling period: 8 minutes / channel

Water sample conditions: Flow rate: >2 ml/s

Temperature: 10~45°C

Pressure: 10KPa~100KPa

Ambient temperature: 5~45°C (higher than 40°C, lower accuracy)

Humidity: <85%RH

Reagent type: 3 kinds

Reagent consumption: About 3 liters per month, a total of 3 kinds

Output signal: Any setting within the range of 0~22mA, each channel is independent

Alarm signal: buzzer, relay normally open contact

Power supply: 220V±10% 50Hz±1%50W

Dimensions: 720mm (height) × 460mm (width) × 300mm (deep)

Opening size: 665mm×405mm

    Are you seeking a quilified alum. die casting mould maker for Lighting? Come to XINYU MOULD for an impressive company tour.Hundreds of all kinds of alum.dies used for past conventional lighting and as well as current fashionable LED lighting  have been designed and manufactured in XINYU MOULD, besides our riched exprience,we have been using Magma mold flow software to simulate air entrapment, filling ,solidification,observe heat spots,and optimize gate,overflow and cooling system, what's a good die for alum. die casting lighting component? XINYU COMMENTS: 1.die reliability,means the least downtime caused by die,2.high productivity and low rejective rate supporting by nice die design and craftwork. we've been building alum. die casting dies for some leading lighting companies,like OSRAM,PHILIPS,ACUITY,GE. what do you hesitate for? XINYU MOULD,the ideal die casting dies solution provider helping you with your excellent alum.die  casting lighting components,like lighting housing, fixtures-

LEd die

 Fig. LED Lighting Housing die and component 

LED Lighting 

A LED lamp or LED light bulb is an electric light for use in light fixtures that produces light using light-emitting diode (LED). LED lamps have a lifespan and electrical efficiency which are several times greater than incandescent lamps, and are significantly more efficient than most fluorescent lamps, with some chips able to emit more than 300 lumens per watt (as claimed by Cree and some other LED manufacturers).The LED lamp market is projected to grow by more than twelve-fold over the next decade, from $2 billion in the beginning of 2014 to $25 billion in 2023, a compound annual growth rate (CAGR) of 25%. As of 2016, LEDs use only about 10% of the energy an incandescent lamp requires

An assortment of LED lamps commercially available as of 2010 as replacements for screw-in bulbs, including floodlight fixtures (left), reading light (center), household lamps (center right and bottom), and low-power accent light (right) applications.

LED die

 Fig. LED Lighting Housing die and component 


Mould Capabilities

  • Xinyu Mould At Glance

1.Year Of Establishment:2002

2.Location:2 (One Is Brand New)

3.Land Area:3600sqm

4.Emplyees:120

5. Equipment;CNC:18 (Makino, Toshiba, Liyang ), WEDM:10, EDM:9, Spotting Machine:2, CMM:2, Gun Drill Machine:2, Die Casting Machine:7, Others:50


  • Xinyu Mould Technical Profile

1. Engineers In 2d&3d: 16

2. Engineers In Cnc Programming:6

3.File Format For 2d: Dwg&Dxf

4.File Format For 3d:Iges&Step

5.Software For 2d:CAD

6.Software For 3d:Simens NX & Pro-E 

7.Software For Programming: Powermill

8.Software For Mould Flow: Magma 


  • Xinyu Mould Process Control

1.MES Process Control System

2.IATF 16949 Quality System

3.Well-Trained Operators

4.CMM Inspection 


  • Xinyu Mould Advantages

1. CAE Support Magma(Lid 18175001)

2.Rich Experience In Casting Dies For Auto Structual Parts,Powertrain;Oil Pan;Redirector; AC Compressor

3.Trial Run Machines Available In House From 160t To 1600t

4.Vaccum Venting System Application In Dies

5. Partial Squeeze Skill In Dies

6.High Precision Imported CNC(5 Axis)

7.Globalized Hr Concept 

  • Xinyu Mould Die Capacity

1.Max Die Size:2500*2500*1800

2.Max Die Tonnage:2500t

3.Biggest Die Casting Machine:1600t

4.Most Complex Die: 11slides

5.Yearly Capacity:350sets 


  • Xinyu Mould Marketing

1.Main Market:Na;Europe;Asia

2.Main Field: Auto;Telecommunication;

Lighting;General Machinery;Power Tool

Furniture

3.Partner Offering After Sales Service:

Available In India&Us,Europe

4.Business Involved:

Aluminum Die Casting Dies

Aluminum Die Casting Components 


  • Xinyu Mould Commercial Terms&Conditions

1. Fob Ningbo/Shanghai

2.Payment Term:Tt

3.For Dies:50% Down Payment 50% Prior To Delivery

4. For Castings: 10% Down Payment

The Rest Within 30days After b/l Date

5.Leadtime For Quotation:2days

6.Feedback For Customers' Query:24hours



Lighting Die

Lighting Die,LED Light Housing Die,Aluminium Light Housing Die,LED Lamp Housing Die

Ningbo Beilun XinYu Mould Manufacturing Co.Ltd. , http://www.xinyudiecasting.com