The Ministry of Environmental Protection has publicly disclosed that many companies have committed crimes under the top of their minds &nb...

Since the beginning of the winter, the Beijing-Tianjin-Hebei region and surrounding areas have continuously encountered heavy air pollution. The 14 inspection teams of the Ministry of Environmental Protection have continued to carry out heavy pollution weather emergency response and air pollution prevention and control work in key cities such as Beijing, Tianjin, Hebei, and other 11 provinces (cities). On-site special supervision.

On December 23, the Ministry of Environmental Protection informed the media about the environmental violations of the coal-fired boilers of Tianjin Jingbin Heating Co., Ltd., Baoding Gaobeidian City Longchuang Thermal Power Center and Wuxi County Vocational School in Hengshui City, Hebei Province.

Among them, Baoding Gaobeidian Longchuang Thermal Power Center has not met the standard of coal quality, has not installed on-line automatic monitoring equipment, unused unused pollution control facilities, direct emission of boiler flue gas, and unorganized emissions of fume from the plant area, etc. on December 20th. Exposure by the media.

The Ministry of Environmental Protection announced on the 23rd that the project was a centralized heating project in Gaobeidian City and was basically completed on November 15, but some monitoring equipment was not installed in time. On November 28, the Gaobeidian Environmental Protection Bureau issued a “Decision to Order Correction of Illegal Practices” and fined 50,000 yuan. Due to the heating involved, no shutdown measures were taken.

At present, the Hebei Provincial Department of Environmental Protection has instructed the Gaobeidian City Environmental Protection Bureau to impose consecutive penalties on the Longchuang Company from December 18, 2015, and requested the Gaobeidian Municipal Party Committee and the municipal government to investigate the responsible persons. At the same time, it strengthened the monitoring of emissions from Longchuang.

According to the Baoding Daily, Bao Jian Municipal Party Committee Standing Committee Executive Vice Mayor Guo Jianying held an interview with the chief person in charge of Gaobeidian City Government on the 21st.

In the interview, Guo Jianying called for the prompt implementation of corrective measures to ensure that the problem is quickly resolved. It is necessary to formulate a rectification plan immediately, and organize the relevant departments to implement all-weather supervision on the operation of environmental protection facilities of Longtron Thermal Power Company. It is necessary to implement strict accountability for problems such as the completion of the heating engineering project of Longtron Heating Co., Ltd. and the abnormal operation of the governance facilities. The illegal discharge of such enterprises shall be punished strictly in accordance with relevant laws and regulations. And we must strictly implement the regulatory requirements for the grid environment, and quickly carry out large-scale investigations on the city's heating and heating boilers. We will in turn reinforce supervision to ensure the normal operation of various environmental protection and control facilities.

In addition, Tianjin Jingbin Heating Co., Ltd., located in Dawang Guzhuang Town, Wuqing District, Tianjin City, found that the total sulphur content of coal samples from coal-fired suppliers was significantly different from the inspection result of the coal samples submitted by the company. The test result exceeded the local standards for Tianjin Industrial and Civil Coal Quality (DB12/106-2015) and was fined 50,000 yuan. The environmental protection department of Wuqing District sealed up and retired the unqualified coal burned, and requested the enterprise to terminate the coal supply of the existing contractual unit and re-qualified the qualified coal; the person in charge of Tianjin Jingbin Heating Co., Ltd. was suspended and transferred. The posts are now strictly followed by the relevant personnel. At the same time, the environmental protection agencies jointly supervised the market and the department of industry and commerce to carry out special law enforcement inspection activities to carry out a pull-net inspection of all coal-fired boiler companies in the region and strictly investigate and punish unqualified coal quality according to law.

On December 9, the North China Supervision Center, the Hebei Province Supervision Bureau of the Environment Supervision Bureau and the Hengshui City Supervision Group found that the coal-fired boilers of the Wujing County Vocational Education Center had not been effective in supervising and inspecting the implementation of local heavy pollution weather emergency response measures. Dust removal and desulphurization measures, serious black smoke. On December 10, Wuyi County Environmental Protection Bureau issued a “Decision of Administrative Punishment” to the unit and fined 50,000 yuan. On December 16, its tea-fired coal-fired boiler was removed and the remaining two heating boilers have been decommissioned and desulphurization and dust removal equipment are being installed. At present, accountability procedures have been initiated for related personnel.

The Ministry of Environmental Protection stated in the notification that the next step will continue to increase the supervision of heavy pollution weather emergency and the special supervision of air pollution control, increase the crackdown on environmental law-breaking enterprises, strengthen emergency response measures, and urge local governments to do a good job in air pollution prevention and control work. The people and the mass media are welcome to supervise them.
Article link: China Environmental Protection Online http://

The company can make multi-cavity Nano Toothbrush mold according to the size of the customer's machine, the size and weight of the product, to ensure the quality of the product, improve the output of the product, reduce the finished product, and make the product more competitive.

Keep secret to your idea and your design.

24 hours (two shifts) / 6 days for production.

Professional design team, mold maker engineer. OEM/ODM service.

Professional QC and R&D teams to assure high quality.

Professional sales team. Good English capabilities and communication skills.

Prompt delivery. For prototype: 3-7 days. Production orders can be arranged specially to meet customer`s urgent demands.

Geographical advantages: within 30 minutes to airport or sea port.

Multi Cavity Nano Toothbrush Mould

Precision Plastic Injection Molding,Pom Material Nano Toothbrush Mould,Pom Nano Toothbrush Mould,Multi Cavity Nano Toothbrush Mould

Yangzhou Baotian Precision Mold Co, Ltd , https://www.jsbtmold.com