The role of deep hole honing machine equipment

The role of deep hole honing machine equipment

The deep hole honing machine tool department is used for machining a variety of workpieces, but it is particularly suitable for honing and polishing workpieces with stepped holes. The precision of machined aperture can reach IT7~IT8 or above, and the surface roughness can reach Ra0.2-0.4μm. It can achieve our expected results, and the deep-hole honing machine tool processing is to use local honing, which can correct the taper, ellipticity and local aperture error of the workpiece. For some cold-drawn steel tubes, strong honing can be performed directly. It is an ideal equipment with high precision and high efficiency. We can use the servo motor with sprocket chain to realize the reciprocating movement of the boring head. While accurately controlling the honing position, we can also use double linear guides with high service life and high accuracy. According to our operating honing pressure can be adjusted according to need, and set the high and low pressure control, on the console can easily achieve rough, fine squat conversion.

For more information, please pay attention to China Deep Hole Rig Trading Website http://skzj.99114.com

Red Winch Shackle Mount For Wrangler Heavy Duty

1.Conventional hook surfaces add higher stresses to Recovery Strap fibers, resulting in decreased strap ratings

2.Shackles can be quickly removed and stowed away until needed for winching.

3.Hooks do not cinch neatly against fairleads and are prone to rattling and loosening

4.Conventional winch hooks are designed for chains – not commonly used recovery straps

5.Billet construction - precision machined from Aluminum round bar

Replace conventional winch hooks with the new safer, stronger, and smarter Winch Prolink shackle mount. Uwin introduces the new ProLink shackle mount for winch cables and synthetic ropes. The ProLink provides a safe means to easily attach a standard 3/4″ Screw Pin Shackle to existing winch cable and rope eyes The cable or rope eye is captured into the body of the ProLink by a removable oversized 5/8″ double shear pin. The front of the ProLink provides the precision shackle mounting hole and massive 1.2″ thick mounting tab.

Winch Rope Prolink

D Ring Shackle,Winch Rope Prolink Shackle,Winch Shackle Prolink,Winch Rope Prolink

Shanghai Uwin Automotive Product Co.,Ltd , https://www.uwinoffroad.com