The robot has dragged on the hind legs of "Made in China 2025"?

China once prided itself on the “world factory”, but this status is now facing challenges. On the one hand, manpower cost advantages in Southeast Asia and Africa have become increasingly prominent and are attracting more and more Chinese companies to relocate their factories. At the same time, the United States is also making efforts to return to manufacturing; on the other hand, the new generation of Chinese employees is no longer interested in the traditional assembly line work, resulting in a serious lack of labor force in many companies. In addition, the production mode that once traded at the expense of the environment for GDP growth has also been criticized. It must be said that China's manufacturing industry has been forced to a critical moment that will not change.

How to continue to maintain the rapid development of China's manufacturing industry, how to get along with the environment friendly while developing the manufacturing industry is the two major problems facing the Chinese manufacturing industry. Under the current new situation, China is looking for a way out for manufacturing industry in another way. In the report on government work at the two sessions this year, Premier Li Keqiang proposed to implement "Made in China 2025", encourage Chinese enterprises to transform and upgrade their traditional production methods, and mobilize all social forces to build China into a manufacturing power. After the concept of “Made in China 2025” was established, Premier Li Keqiang’s subsequent executive meeting convened by the State Council established a decision to focus on supporting ten areas such as robots and promote smart manufacturing and green manufacturing.

Obviously, "Made in China 2025" is the first step in China's "three-step" strategy. As an integral part of the future national-level major strategy, industrial automation is considered to be one of the branches with a medium-term and long-term boom. It is also exactly what China is trying to implement.

The 2015 China International Electromechanical Products Expo to be held on September 23-25, 2015 at Wuhan International Expo Center is a comprehensive solution for industrial automation, production and process automation, electrical systems, industrial IT and manufacturing informatization, Microsystem technology, robotic applications as one of the industry automation industry event. Representatives from dozens of industries such as machinery manufacturing, auto parts, instrumentation, rail transit, petroleum and petrochemical, and logistics equipment will present the latest electromechanical products and solutions to showcase the charm of advanced manufacturing, and the products and solutions exhibited at the same time To a certain extent, it reflects the level of industrial automation in China.

As the backbone of industrial automation, industrial robots are quietly changing the mode of employment in the manufacturing industry. The human-oriented production model is gradually shifting to a robot-based model. Under the pressure of labor shortage and safety regulations, many companies have shown an urgent need for robot substitution. Companies have also begun to accept the advantages of high efficiency and low cost of robot production.

According to data from the International Federation of Robotics, last year, the global sales of industrial robots were 225,000, and China purchased about 56,000 of them. It is expected that by 2017, the number of industrial robots in China will become the world’s largest.

As the market continues to heat up, the rapid decline in the cost of robots and complete sets of equipment has also led to the early arrival of the inflection point in the robot application market. Under the dual drive of policy support and social demand, an industrial storm centered on robotics technology is sweeping the world. It is foreseeable that as a manufacturing power, China will maintain its position as the world's largest robot market for a long time.

Of course, while the Chinese robotics industry has major development opportunities, it also faces many challenges. The robotics industry has overturned the old road of “low-cost, low-end” that the manufacturing industry in the past decades has been relying on the demographic dividend. The standpoint of the competitiveness of the robot industry is quality and innovation. For China, the biggest pain point is the lack of technological innovation, and the relatively weak foundation. Such as domestic high-end, special sensors, smart meters, automatic control systems, numerical control systems, in addition to the robot market share of less than 5%, and the quality and reliability of key components lags behind the world advanced level of 5-10 years.

Some experts believe that in the coming years, the demand for intelligent robots in China's manufacturing industry will soar. If we cannot make breakthroughs in technological innovation and do not master core technologies, China’s “Made in China 2025” will be difficult to achieve.

However, the development of anything goes through a process from immature to mature. Due to the late start of China's robotics industry, China's robotics industry is on the road to maturity. Therefore, both the government and the enterprise need to pay great attention to the development of the robot industry. The emphasis on development requires not only the expansion of industrial scale, but also the pursuit of high-level industrial development. In the current development of many issues, as long as they attach importance to and improve, China's robotics industry will continue to maintain a good momentum of development.

To sum up, the development of the robotics industry in China is more of an opportunity than a challenge, or a challenge than an opportunity. It depends on whether we can face the current problem with a correct attitude.

Waste Plastic Pyrolysis Plant

Shangqiu Yilong Machinery and Equipment adheres to the principle of [Quality is the cornerstone of corporate reputation" in the spirit of professional dedication and excellence.

Starting from the product quality, our company produces a new horizontal rotary waste Plastic Pyrolysis Plant, and takes the customer's demand as the source of production.

The new horizontal rotary waste plastic refining equipment has got brilliant user evaluation.

Adhere to the "quality wins" production principle, and strive to provide customers with a satisfactory and assured product safety and economical for customers who want to buy new horizontal rotary waste plastic refining equipment.

Waste Plastic Pyrolysis Plant,Tire Plastic Pyrolysis Plant,Waste Plastic Pyrolysis Oil Plant,Waste Tyre Pyrolysis Plant

Shangqiu Zhongming Eco-Friendly Equipment Co., Ltd. , https://www.sqzhongminggroup.com