Dongfeng Duolika swing arm garbage truck

Dolika swing arm garbage truck applies to the national general garbage bucket, with self-unloading function, hydraulic operation, garbage bucket can be hung from the crane, the swing arm once work cycle time: 60S. The car is characterized by the separation of the bucket from the body of the vehicle, which enables a single vehicle to work in conjunction with multiple buckets and recycle it, which fully improves the vehicle's transport capacity. It is particularly suitable for short-distance transport, such as the cleanup of urban waste by the sanitation department. , transportation, etc.

Dongfeng Duolika swing arm garbage truck

Dolika Swing Arm hopper: The hopper is a metal weld that is open and sealed. When the bulk cargo is loaded into the hopper, a hanging chain is hung and the hopper can be lifted onto the vehicle by operating the swing arm. When the material is unloaded, the swing arm is used to lift the hopper, and after landing, the hopper is unloaded by taking off the hanging chain at one end. The maximum tilt angle of the hopper can reach 86°.

Hydraulic operating system: consists of fuel tank, oil pump, multi-way valve, hydraulic cylinder, balance valve, hydraulic lock, oil filter and piping. The entire system is powered by automobile gearboxes and power take-offs. The manual multi-way valve operates the outrigger cylinder and the swing arm cylinder for telescopic movement. The displacement of the pump in this system can be regulated by the manual throttle in the car. The handle of the manual reversing valve controls the stroke of the valve rod to control the movement speed of the piston rod. The system pressure can be set by the safety relief valve. The system will exceed the set pressure and the safety overflow will be exceeded. Flow valve overflow.

Operating System: Through the system to achieve the conversion of various functions. Prior to operating the multi-way valve, a power take-off should be hung to drive the pump. By manipulating the handles of the multi-way reversing valves, the expansion and contraction of the legs and loading and unloading work can be completed. By operating the throttle lever beside the multi-way valve, the engine speed can be controlled to adjust the operating speed of the system's flow change mechanism.

Dolika arm-type garbage truck fully utilizes hydraulic technology, which makes the vehicle's design structure reasonable, excellent performance, and flexible operation.

One: The entire operating system of Dolika Swing Arm Garbage Truck consists of power take-off, oil pump, manual multi-way valve, one-way hydraulic lock, balance valve, oil pipe, fuel tank, etc. The entire system is provided by the automobile gearbox and power takeoff. Power, manual multi-way directional valve control leg cylinder, swing arm cylinder for telescopic movement.

Second, Dolika swing arm garbage truck swing arm mechanism consists of steel box structure. Its main function is to drive the swing arm to rotate around the shaft by a multi-way valve operating cylinder, its rotation angle is 145°, which can improve the garbage hopper and dump the rubbish hopper.

Third, Dolika Swing Arm Garbage Garbage Dump is a kind of cart used to transport rubbish. The swing arm garbage wagon is provided with two telescopic oil tanks for opening and closing the upper roof on both sides of the upper roof cover of the wagon, and the raising lever of the lifting waste bucket is linked together with the upper roof cover.

Four, Dolika swing arm garbage truck operating system pump displacement can be controlled by the manual throttle in the car, manual valve handle to control the valve rod stroke to control the speed of the cylinder piston rod movement, the system pressure can be set by the safety relief valve, System over set pressure will overflow safety relief valve.

Fifth, Dolika swing arm garbage truck arm cycle time 60S, garbage bucket and the body separate, complete a car and multi-bucket cycle, greatly reducing the cost of municipal sanitation. The arm of the swing arm type garbage truck is equipped with a hydraulic cylinder of 1680 mm/bore diameter of 125 mm; the stroke of the swing arm is: 3740 mm of no-load flat support, and the vertical working state of the swing arm is up to 3890 mm.

Suizhou Zhongyue Dedicated Automobile Sales Co., Ltd. is headquartered in Suizhou Automobile Industry Park and was established in December 2015. Its main sales include sprinkler series, suction dung collection truck series, garbage truck series, and sweeping vehicle. Series, tank refueling vehicle series, aerial working vehicle series, truck crane series, dump truck series, coach vehicle series, semi-trailer series, fire truck series, van type (refrigerated) vehicle series, tractor series, chemical vehicle series, More than 300 types of trucks for eighteen series, including powdered material vehicle series, cement mixer series, wrecker series, and pressure vessel series

hotline

Office Phone: 400-0722-618

Fax: 0722-3821899

e-mail:

Company Website: http://

Our products are rigorous in manufacturing, high quality and reliable in operation. Our products are exported to many countries and are well received by users. We off OEM services to global customers and we can manufacture slurry pumps or spare parts according to the construction drawings and samples. The parts of Slurry Pump can be made of wear-resistant cast iron, which can be manufactured as follows according to the customers and using conditions:

1. Anti-wear material:

 KmTBCr26 is adopted when the solid particles of the conveying slurry are fine

KmTBCr15Mo3  adopted when the solid particles are coarse

2. Corrosion resistant and wear-resistant material: A49

3. Other materials: Ni-hard, ductile iron, stainless steel.

Metal Spare Parts

Metal Spare Parts,Metal Processing Spare Parts,Spare Parts Metal Stamping Parts,Quality Metal Spare Parts,Metal Building Parts

Shijiazhuang Soarho Machinary Co.,Ltd , https://www.xhslurrypump.com