1, the outer ring of the bearing inspection. After being used for a period of time, the E-Crusher will cause serious wear and tear, which will cause the relative rotation of the outer ring of the bearing. The slight rotation in time will also cause the user's special attention, and the wear status and position of the bearing will be carried out. Regular inspections, discover problems, and take timely measures.

2, pay attention to the adjustment of the discharge port. In production, the size of the mouthpiece of the broken jaw will affect the taste of the finished product. Because the user needs to obtain materials of different sizes, it is necessary to adjust the discharge port, but the adjustment range should not be too large nor too small. This may cause equipment failure.

3, circuit inspection. Before the formal load operation, the equipment needs to run idle. When the air is running, it is necessary to pay special attention to whether the motor circuit is reversed. This seems to be a very simple problem. It is a problem that is easily overlooked and the circuit is easily reversed. The reversal, this is obviously easy to cause equipment failure