New design, efficient and economical: Doosan forklift D33/35F (M) new debut
What if I have three tons? The Doosan forklift is even stronger!
In order to further adapt and expand the market, based on the full market research, based on the customer's experience and new trends in market development, Doosan Forklift launched a new generation of internal combustion balance weight D33/35F (M) forklift, excellent performance and beautiful appearance, outstanding The safety, environmental protection, comfort, energy saving and high efficiency of the products make driving the forklift a pleasure. According to the working conditions of the forklift, the design is specially designed for various occasions. The engine emissions meet the Euro III standard and achieve strong power and The perfect combination of clean and environmental protection.
Excellent vehicle performance
The Euro III emission engine, which is specially designed for forklift conditions, and the Bosch fuel injection pump, combine to achieve the perfect combination of strong power and clean environment.
The energy-efficient load-sensing hydraulic system, combined with the high volumetric efficiency of the gear pump and the new structure of the control valve, significantly reduces the pressure loss by 60%, while further reducing the hydraulic oil temperature while greatly improving the operating efficiency.
The new weight appearance, aerodynamics principle, optimized air duct, large-diameter air outlet to enhance the heat dissipation capacity, the weight waist line with the engine cover, the flow pattern of the whole vehicle echoes.
The enhanced load-bearing capacity greatly enhances the load-carrying capacity of the vehicle by further strengthening the working device and the load-bearing performance parts. The reduction of the center of gravity of the vehicle and the backward movement also ensure the vehicle's load-bearing capacity is strengthened, effectively solving the back-turn of the vehicle during operation.
Excellent ergonomics
The newly designed engine hood is environmentally friendly and has better heat insulation effect, which effectively reduces vibration and noise. The integrated convenience box and cup holder are convenient and quick.
The joystick on the right side of the seat, the car structure mode, the Deck Mounting method makes the arm sag naturally during the operation, the operation is comfortable and labor-saving, and the balance is maintained more harmoniously, which effectively reduces the driver's fatigue.
Pneumatic stepless adjustment of the steering wheel angle, suitable for a variety of body drivers, easy to get on and off the water with a backlight meter, you can instantly understand the condition of the vehicle.
The low-level instrument panel allows the driver to easily see the fork tip without moving the body, facilitating cargo adjustment.
The new D33/35F(M) internal combustion counterbalance forklift injects better innovation and process technology, and achieves breakthroughs in safety, productivity flexibility and ergonomics, giving customers efficient operation efficiency and excellent operability. Excellent stability and maximum forklift value. (This article is from Doosan)
Concrete Pile Pre-stressed/Tension Machine:
Tension Machine is a kind of feedthrough pre-tensioing. It is also called Spun Pile tension jack machine, Pole Tension Machine, prestressed tension machine etc. It is the neccesary equipment to produce Pre-stressed Concrete Spun Pile and prestressed concrete pole products. As the end of the tension rod is connected to the anchor with thread, it can be applied to various forged anchors, chilled iron anchor used for stayed-cable bridge and other similar anchors, as well as pre-tension pulling for pipes. In accordance with actual requirement.
HH Tension Machine's advantages:
1. The large-screen LCD display.
2. Double control mechanism of touch screen and keyboard, high reliability.
3. Directly work after the input of tensioning data, and the oil cylinder will automatically complete the tensioning process to reduce uncertain factor of manual operations and improve the tensile quality.
4. Built-in SD card function, which can save the tensile data to the computer regularly, and check the record at any time.
5. With its own printer, it can print tensile data in working time, avoiding the tedious and unstable manual record and ensuring the traceability of tensegrity data is verified.
Technical Parameter:
1. Oil pump flow: 12L/min
2. Motor power: 7.5kw
3. Rated power: 31.5Kpa
4.Tension force: 2000KN
5. Tension stroke: 200mm
6. Programmable controller of automatic control system + input and output of analog data Color touch screen, USB interface output
7. Control voltage: 380V+24V
8. Accuracy of prestress control:±0.1Mpa
9. Data transmission rate is 100%
Main configuration:
Automatic tension control system, 300T jack, oil pump, lifting trolley, tensioning rod, tensioning head and supporting foot
If you have any questions, please contact with us. Welcome you can visit our Factory.For inqury,Please send mail directly to us.
Concrete Machine,Pre-Stressed Machine,Pre-Stressed Concrete Machine,Concrete Pre-Stressed Machine
Jiangsu Haiheng Building-Materials Machinery Co.,Ltd , https://www.jshaiheng.com