Zoomlion industrial vehicles debuted in 2017

Recently, the annual business conference of Zoomlion Industrial Vehicle Co., Ltd. was held in 2017 in Wuhu. At the conference, Zoomlion displayed 19 different tonnages covering the internal combustion counterweight forklifts, electric counterweight forklifts, and warehouse forklifts. Forklift products.

2017年中联重科工业车辆公司商务年会隆重召开
In 2017, Zoomlion’s annual business conference was held

4 new 2017 forklift products unveiled on the same day, including FE18H three-point electric forklift, FB30Z

Reinforced outdoor work electric counterbalanced forklift, YB15 small forward forklift and FD45 internal combustion counterbalanced forklift. The new shape design, more intelligent configuration, and the aurora green appearance color scheme will lead the 2017 industry market.

At the annual business conference, Jiang Ming, General Manager of Zoomlion Industrial Vehicles, stated that in 2016, the industrial vehicle company actively promoted the product 4.0 project, and in accordance with the requirements of green, smart, and reliable, it launched a number of models with market competitiveness and differentiation. Designed new products.

中联重科工业车辆公司总经理江明在商务年会上致辞
Jiang Ming, General Manager of Zoomlion Industrial Vehicles Co., Ltd. delivered a speech at the annual business conference

It is understood that the new 4 forklifts introduced this time are more in line with the needs of the market and customers, and are fully upgraded in terms of performance optimization, product intelligence, and energy conservation and environmental protection.

As the turning "master" of forklift products, the newly upgraded FE18H three-pivot forklift has been optimized for product performance indicators and dimensions, reaching the leading domestic level. FE18H modeling dynamic, the pursuit of ergonomic excellence, small diameter steering wheel operation easier; side of the joystick design, more in line with the driver's operating habits. Electro-hydraulic proportional valve with integrated operating handle, set a variety of control buttons in one, you can complete all operations with one hand, greatly improving the user's operating efficiency.

Electric forklifts have always been favored by the market. However, due to their inapplicability to outdoor operations, their application scope is relatively narrow. Zoomlion's new FB30Z—3-ton reinforced outdoor work electric counterweight forklift breaks through this industry problem. Dustproof, flexible connection between steering axle and body, improving shock absorption. At the same time, in order to ensure the continuity of outdoor operations, the battery capacity has been significantly increased. The performance and lifting performance of the FB30Z have been significantly improved. The performance of the FB30Z is in line with the 3-ton internal-combustion forklift. Some of the parameters even surpass the internal-combustion vehicle and become a product that can compete with the internal combustion forklift.

代理商试驾中联重科全新产品
Dealer test drive new products in Zoomlion

Zoomlion has also introduced a YB15-1.5-ton small forward-moving forklift with new features and functionality. It also has the functions of a stacker truck and a forward-moving vehicle, but its narrow-passability is stronger than that of an ordinary front-loader with a large body. . YB15 can be used to lift the battery in two ways: hoisting and side-fetching. It adopts a three-level full-free gantry, H-shaped channel steel, which increases the visibility of the gantry; intelligent corner deceleration, high cargo speed limit, and various operating speeds. Can meet a variety of conditions.

In 2016, the export volume of Zoomlion Forklift's overseas markets further increased. The company has specially developed a new 4.5-ton internal combustion counterbalanced forklift to meet the needs of overseas markets. Its appearance is concise, generous, and gives a sense of prudent, balanced hollow design at the back to add dynamicity to the full shape. The hydraulic system of the vehicle adopts a multi-way valve with load sensing and a steering gear, which can greatly improve work efficiency. In ergonomics, the foot suspension is used to increase the driver's operating space, and the vehicle is fully suspended. The top guard design reduces the vibration of the whole machine and makes the driver more comfortable.

On the same day, General Manager Jiang Ming stated at the meeting that Zoomlion Industrial Vehicles has built a good commercial ecological chain and established a business circle of “integrity, win-win, cooperation, and competition” as a business concept. In 2017, the business positioning of China Forklift was to further consolidate the foundation of products and channels. Pay attention to the balance between scale and efficiency, and strengthen the benign operation of the business chain. Under the premise of controllable risk, the domestic market will focus on nurturing and supporting “friend circle” agents and customers, and stabilize market position.

At the meeting, a grand ceremony was also held for the new member awarding ceremony for the "Hundred Taichung Club" and the award ceremony for excellent agents. Agent representatives talked about their experience in distribution network construction, large customer development, and financial leasing model business. (This article comes from Zoomlion Click to enter Zoomlion Online Purchase page )

Related news: Zoomlion Forklift Machinery

Sheet Metal processing is formed by laser cutting or stamping process, shear and bending, welding, riveting. The Sheet metal fabrication used are cold-rolled plate, hot-rolled plate, galvanized plate, copper,brass, copper, beryllium copper, aluminum, stainless steel. Sheet metal fabrication processing steps: according to the parts drawing (3D) expanded into a plan (2D), laser cutting or die stamping shape, CNC punching each bending part, should pay attention to the direction of the burr of the workpiece. Then the students are welded or riveted (some). Surface treatment after processing: electroplating, passivation, sand blasting,powder coating,brushing, anodized treatment. Products are generally made for the connection and the outer cover. Applications in automobile parts,robotics, drone, communications, medical devices, industrial automation equipment.

Sheet Metal

Sheet Metal,Precision Sheet Metal Stamping Parts,Leaser Cutting Sheet Metal,Anodized Aluminum Bending Parts

YaoPeng Metal Products Co., Ltd. , https://www.ypmfg.com