Jinyuan Technology biomass polygeneration technology to promote the development of renewable energy
Kam Yuen Technology is 000 million Tatsu Group subsidiary. Jinyuan technology biomass polygeneration technology leading the country, the main use of advanced pyrolysis gasification technology, the traditional biomass energy generation, based on the same time can produce gas, carbon, heat (steam, hot water), fertilizer, will The added value of straw resources greatly increased, while extending the straw processing industry chain, to create more value.
Biomass is an important renewable energy source and it is widely distributed and huge in quantity. Common biomass of corn, wheat, cotton, rice straw and rice husk, such as agricultural and forestry waste. At present, Jinyuan Biomass Polygeneration Project covers all parts of the country, absorbing and digesting the three residues of local agriculture and forestry, especially straw. So that the phenomenon of straw burning in the area will no longer occur, and the fine development of local environment and circular economy will be promoted.
Jinyuan technology biomass polygeneration technology details:
The first gasification pyrolysis, the biomass transported to the gasifier, gasifier in a series of complex pyrolysis, gasification, anaerobic combustion and other reactions, resulting in a large amount of biomass gas (the main component of CO, H2, CH4, CnHm, etc.). After the purification of biomass gas sent to the internal combustion gas engine to generate electricity for their own use or full Internet access.
Secondly, the remaining gasification product is biomass carbon. According to the different raw materials of biomass gasification, biomass carbon can be made into high value-added carbon-based fertilizer, barbecue charcoal and activated carbon.
Thirdly, biomass gas can be treated and purified after being cleaned, resulting in bio-tar and wood vinegar. Bio-tar can be directly marketed as fuel, and wood vinegar can be used as foliar fertilizer. Odor, biocide and so on.
Fourth, gas cylinder liner water and flue gas waste heat can be based on the needs of the surrounding, to provide hot water to restaurants, hotels, bathing centers for the surrounding area heating, but also to provide steam to the production cooperation.
The whole production process without waste water, waste discharge, with good economic and environmental effects, is a green, environmental protection, recycling and sustainable development of new technologies.
Jinyuan science and technology innovation and technological advantages
1. Gasification by-products have high utilization efficiency and high economic benefits: gas phase products (combustible gas) are used for power generation, gas supply and coal substitute; foliar fertilizer and deodorant are prepared from liquid phase products (straw vinegar liquor) Phase products (biomass carbon) can be made of carbon-based fertilizer, activated carbon, barbecue charcoal, etc .;
2, good environmental benefits: The traditional technology is the complete gasification of biomass, the technology is partial gasification, biomass most of the sulfur, nitrogen, carbon retained in the biomass carbon, compared with the traditional technology to reduce CO2, SO2 And NOX and other harmful gas emissions, and the entire production process without waste water, waste discharge. But also reduce the disposal of a large amount of agricultural waste, reduce pollution caused by straw burning, and reduce CO2 emissions.
3, gasification technology and equipment systems, adaptability and strong: to adapt to all kinds of different shapes, composition, mobility, energy density of biomass, and the water content of biomass requires a broad, as long as the moisture content of ≤ 25%, direct combustion And traditional gasification requires biomass moisture content of less than 20% and each of the more stringent requirements of biomass varieties.
4, good system stability, high utilization: continuous production can be achieved, the use of hours can reach 7000h, a small amount of maintenance
Plastic Injection Moulding Machine
Plastic Injection Moulding Machine,Horizontal Injector Machine,Crate Automatic Injection Moulding Machine,Fixed Pump Injection Moulding Machine
Zhejiang Golden Eagle Plastic Machinery Co.,Ltd , https://www.goldeneagle-machinery.com