Jiangxi's 8 expressways were sealed due to snow

On the 4th, most of Jiangxi Province ushered in the first heavy snow this year. Snowfall has caused ice and snowfall in many areas of the country. High-speed and airports have been greatly affected. It is expected that there will still be snowfall in the north-central Jiangxi on the 5th, and freezing rain may occur in some parts of the south. Please pay attention to traffic safety when you travel.

It is understood that due to snowfall, the province's Daguang, Fuji, Hukun, Jiguang and other eight high-speed sections of the road ice, in order to protect the safety of drivers and drivers, some high-speed road sections in Jiangxi are subject to varying degrees of control.

High-speed highways in the province are currently operating normally

Nanhui News reporter Yuan Huixiang reported: On the early morning of the 4th, many prefectures and cities in Jiangxi Province issued warnings on the road’s icy yellowness, which led to the freezing of roads on the high-speed sections of Daguang, Fuji, and other sections of the province that morning. The reporter was informed that as of 17:00, except for some sections of the road due to traffic accidents caused by slow traffic, the province's highway traffic normal. Due to the rain and snow weather in recent days, the traffic department advised the majority of owners to bypass some of the ice-prone road sections.

Shanghai-Kunming Expressway Changyi section Yaohu bridge deck ice, vehicles can be from Zhejiang to Guangzhou direction via Shanghai-Kunming high-speed Lianyungang Yingtan hub transfer Jiguang high-speed Yingrui section, Ruiqi high-speed, Daguang high-speed; from Nanchang The direction to Zhangzhou can be via Changtong Copper Expressway to Daguang Expressway.

Fortunately, the Changbai section of the Fuyin Expressway is frozen at Tongyuan, and passing vehicles can be transferred from the high-speed Shahe Toll Station of the Fuyin Expressway to the 105 National Highway and then from the De'an Toll Station.

The Daguang-Guangzhou Expressway from the Suichuan to Hengshi sections and the bridges and ramps are frozen, causing traffic to be blocked. The vehicles from Zhangshu to Zhangzhou can be transferred from the Ji’an South toll station to the 105 National Highway and then from the Xinfeng Toll Station. High-speed; from Zhangzhou to Yushu, from the Nankang Toll Station to the high-speed turn 105 National Road, and then from the Ji'an South toll station on the high-speed.

The vehicles from Guangzhou to Zhejiang can be transferred from Taiyuan Section of Daguang Expressway to the South Ring Expressway of Zhangzhou City, and then to Ruiru Section of Xiarong Expressway and Eagle Ring of Jiguang Expressway.

Flight Changbei Airport was delayed by 50 flights

Nanchang News, Nanchang News, Intern Guo Bo and reporter Yuan Huixiang reported: On the 4th, due to the continued heavy snow weather, Nanchang Changbei International Airport was closed until about 12 o'clock. As of 17:00 that day, a total of 50 flights were affected. At the airport, it is recommended that passengers traveling in the past few days should consult the airline flight status before leaving for the airport.

The reporter also learned from the Civil Aviation Jiangxi Air Transport Branch that from the time the airport was open to 1700 hours, a total of 29 security flights took off and 28 flights were landed.

Some train passengers change train travel
Nanchang News, Nan Zhang, and Guo Bo, an intern, and Yuan Huixiang, a reporter, reported that heavy snow has hit roads and civil aviation to varying degrees. On the 4th, the reporter learned from the railway department that the passenger trains currently opened by Nanchang have not been affected by heavy snow. Many of the passengers who originally intended to take the shuttle bus or take the plane were transferred to the train. At the same time, the Nanchang Railway Station has started an emergency plan for snow days. Not only all the heating facilities at the station have been opened, but also the heating in the waiting areas and ticket halls has fully opened. South Station staff said that the current station's emergency ticketing points have all been opened and tickets will only be sold on the same day.

As everyone knows, the higher the noise attenuation value, the better the performance of its common mode inductor. 
And daily use the latest winding technology, using high-demand ferrite cores to achieve the most effective noise suppression design. 
It has high common mode impedance in the noise band and low differential mode impedance in the signal band. 
The low differential mode impedance with high coupling coefficient makes high-speed signals almost without distortion.

Automotive common mode inductors (CMC3225/4532-(AC/AE) series) have an ultra-thin thickness of 2.8mm, in order to reduce the volume and cost; 
five inductance values, easy to choose; low impedance coils and strict tolerances, Can be customized according to requirements. 
Compatible with the working temperature required by automobiles –40°C to +125°C.

In addition, we can provide customized products according to requirements, and we can also produce inductors beyond the existing specifications. 
Compatible with TDK, Murata, Taiyo and Vishay common mode inductors. Products comply with RoHS, lead-free soldering technology and 100% lead-free, 
fully satisfying customers and environmental protection. Contact our business department for more detailed information.