Decoration plate can be such a province
2021-11-13 11:07:49
For home improvement, many homeowners are ignorant. Most owners buy plates to go back and do furniture. They will follow the recommendations of woodworking masters to buy a certain number of plates. Even so, many of the owners who have been renovated will certainly know that there will be material leftovers, scraps and other issues. The artisan editor of the Top Ten Brands of Chinese Plates wants to say that, in fact, we can save the plates from the specifications, thickness, and structure of the plates.
Parts specifications:
The specifications of the wood-based panels are basically all inch sizes (1220mm×2440mm, 1220mm×1830mm), and the panel furniture is based on artificial panels. Therefore, if the specification of the parts is 392, 595, 195, etc. The size is suitable, will increase the utilization rate of the plate and reduce the waste.
In addition, after considering the specifications of the parts in accordance with the raw material specifications, consider whether the dimensions can be further reduced. For example, a drawer side panel, its width is set to 1150mm, the width of the raw material sheet is generally 1220mm this size is very conducive to increase the yield.
Thickness of parts:
There are many habits in the production of furniture. These habits are both good and bad. For example, furniture in the north tends to have heavy habits, and it is customary to use thick plates and large plates. This use of materials is disadvantageous in some cases. Such as drawer side panels, we commonly used 16mm, 18mm thick plate; but many manufacturers in the South, in high-end furniture has been commonly used 12mm thick plate.
Practice has proved that in the shape and strength, this size has stood the test. To expand, some small laminates, partitions, so that the side panels, top panels (such as bedside cabinets), can use 12mm thin.
The structure of the parts:
Many components, such as side plates and bulkheads, require thicker plates for molding purposes. In this case, sheets cannot be used for the purpose of saving materials. However, we can use the “inner structureâ€, which is often called “hollow structureâ€. Making wooden frames made of wood and then covering them with plywood saves both material and weight.
This move has been developed to be more mature and widely adopted. However, some weight-bearing parts, such as desk tops, are not suitable for this structure.
Furniture structure:
Furniture must have a solid structure, which is often said to be "solid", and some furniture can still meet the requirements of "solid" after omitting certain components. Looking at many of the commonly used products in the past, you can find many components that can be omitted. This savings is often huge and often overlooked. In addition, to break through the conventional framework, we must design more novel and novel products that are simple in structure and shape, so that we can get more results with less effort.
Making arrangements:
With the production of furniture, there will be many remaining materials that cannot be fully utilized. At this time, some products suitable for the size of these raw materials should be designed to make some small furniture, often because these furniture are very arbitrarily and creative, but they are very popular.
Outdated materials:
Some old materials that are outdated by some colors and patterns do not have a long-term backlog. They can make full use of furniture parts that are not exposed to light, such as partitions in floor panels and cabinets. It does not have to be consistent with the color and pattern of the outer surface material. Facts have proved that this method does not affect the appearance, does not affect the use of methods, but also more popular.
In addition to providing you with quality products, the artisan artisan health plate will also teach you a lot of little knowledge to bring convenience to you and your family! Fine materials, artisans, ecological your home!
Shenzhen Rongdian Printing Products Co., Ltd. is located at 303, 3rd Floor, Building 2, Potoudu Industrial Zone, Longxi Village, Longcheng Street, Longgang District, Shenzhen, Guangdong Province, China. It mainly deals in various printing products: stickers, product color boxes, exquisite gift boxes, picture albums , Promotional color pages, trademark tags, envelope receipts! Shenzhen Rongdian Printing Products Co., Ltd. adheres to the production philosophy of "printing every product with heart" and strictly implements it! Looking forward to your visit~
Parts specifications:
The specifications of the wood-based panels are basically all inch sizes (1220mm×2440mm, 1220mm×1830mm), and the panel furniture is based on artificial panels. Therefore, if the specification of the parts is 392, 595, 195, etc. The size is suitable, will increase the utilization rate of the plate and reduce the waste.
In addition, after considering the specifications of the parts in accordance with the raw material specifications, consider whether the dimensions can be further reduced. For example, a drawer side panel, its width is set to 1150mm, the width of the raw material sheet is generally 1220mm this size is very conducive to increase the yield.
Thickness of parts:
There are many habits in the production of furniture. These habits are both good and bad. For example, furniture in the north tends to have heavy habits, and it is customary to use thick plates and large plates. This use of materials is disadvantageous in some cases. Such as drawer side panels, we commonly used 16mm, 18mm thick plate; but many manufacturers in the South, in high-end furniture has been commonly used 12mm thick plate.
Practice has proved that in the shape and strength, this size has stood the test. To expand, some small laminates, partitions, so that the side panels, top panels (such as bedside cabinets), can use 12mm thin.
The structure of the parts:
Many components, such as side plates and bulkheads, require thicker plates for molding purposes. In this case, sheets cannot be used for the purpose of saving materials. However, we can use the “inner structureâ€, which is often called “hollow structureâ€. Making wooden frames made of wood and then covering them with plywood saves both material and weight.
This move has been developed to be more mature and widely adopted. However, some weight-bearing parts, such as desk tops, are not suitable for this structure.
Furniture structure:
Furniture must have a solid structure, which is often said to be "solid", and some furniture can still meet the requirements of "solid" after omitting certain components. Looking at many of the commonly used products in the past, you can find many components that can be omitted. This savings is often huge and often overlooked. In addition, to break through the conventional framework, we must design more novel and novel products that are simple in structure and shape, so that we can get more results with less effort.
Making arrangements:
With the production of furniture, there will be many remaining materials that cannot be fully utilized. At this time, some products suitable for the size of these raw materials should be designed to make some small furniture, often because these furniture are very arbitrarily and creative, but they are very popular.
Outdated materials:
Some old materials that are outdated by some colors and patterns do not have a long-term backlog. They can make full use of furniture parts that are not exposed to light, such as partitions in floor panels and cabinets. It does not have to be consistent with the color and pattern of the outer surface material. Facts have proved that this method does not affect the appearance, does not affect the use of methods, but also more popular.
In addition to providing you with quality products, the artisan artisan health plate will also teach you a lot of little knowledge to bring convenience to you and your family! Fine materials, artisans, ecological your home!
Packaging Color Box Customization
What products does the custom packaging box apply to:
For now, packaging color boxes are suitable for most products, but we recommend using gift boxes for products such as jewelry and jewelry. I believe everyone knows that color boxes cannot withstand too heavy things, otherwise the packaging color boxes are really It is good quality and cheap and has no disadvantages.
Because it is a customized model, we must first follow the customer's opinion on the material, and then combine the customer's opinion to propose our requirements. If no accident, the commonly used paper is coated paper, and the gram is 350 grams. Of course, if the box is too large , You have to use 400 grams of paper, the main thing is to confirm with the customer first~
Shenzhen Rongdian Printing Products Co., Ltd. is located at 303, 3rd Floor, Building 2, Potoudu Industrial Zone, Longxi Village, Longcheng Street, Longgang District, Shenzhen, Guangdong Province, China. It mainly deals in various printing products: stickers, product color boxes, exquisite gift boxes, picture albums , Promotional color pages, trademark tags, envelope receipts! Shenzhen Rongdian Printing Products Co., Ltd. adheres to the production philosophy of "printing every product with heart" and strictly implements it! Looking forward to your visit~
Packaging color box custom manufacturer, packaging color box custom printing, packaging color box design
RODIANT PACKAGING & PRINTING CO.,LIMITED , https://www.rodiantpackaging.com