Liberation sweeper price quote

  Liberation sweeper parameter data

 

Detailed vehicle

The sweeping vehicle adopts the liberation tiger VN (wheelbase 3300 ) national 52- type chassis modification, adding auxiliary engine, fan, clean water tank, garbage bin, left and right vertical sweep, rear suction cup, sweeping dust reduction system, hydraulic system, special The device's electronic control system and sub-frames are modified (can be installed before and after flushing).

1. The liberation tiger VN (wheelbase 3300 ) type national five- two type chassis, the cab with front turn, with the original direction of assistance, 7. 0 0 R 1 6 wire tire, front and rear bridge with air shock absorber. Equipped with all-wood 70kw engine, low fuel consumption .

2. The auxiliary engine adopts the powerful Isuzu 57Kw engine. (Figure 1 ) .

 

(Figure 1 )

3. The automatic clutch drives the fan to reduce the impact on the engine when the fan starts and stops. It has the advantages of high wear resistance, long service life, low noise, low fuel consumption and cost saving during use.

4. It adopts the listed company Beibotaixin high-power wear-resistant maintenance-free centrifugal fan, which has no noise, high efficiency , large air volume and long service life (Fig. 2 ) .

 

(Figure 2 )

5. The water tank fully utilizes the car space, the volume is 1.5 m3, and the built-in water level alarm. The inside of the water tank is made of anti-corrosion, anti-rust and anti-virus treatment, which makes the pump run safer and ensures the cleaning efficiency.

6. The garbage bin adopts double-layer inner tank stainless steel structure with a volume of 4 m3 and a filter plate inside, which can effectively prevent the light objects such as leaves and plastic bags from blocking the discharge of air outlets and dust. The built-in spray dusting device maximizes the space where the garbage can be loaded with garbage, and the car body is tipped and unloaded. Consultation hotline (WeChat with the same number)

7. The left and right vertical sweeps are single sweeping discs, and the front sweeping discs have automatic avoidance function, which reduces the number of sweeping brushes and the consumption of sweeping brushes, and can reduce the use cost. A water spray device is installed on the brush for spray dust reduction. The left and right vertical sweep control can realize different working modes such as back sweep and full sweep (Fig. 3 ) .

 

(Figure 3 )

8. The suction nozzle has a suction width of 1100mm and a maximum working width of more than 2.8m . Three height-adjustable nozzle wheels make it easy to adjust and ensure a reasonable gap between the nozzle and the road surface, so as to achieve better suction and higher efficiency (Figure 4 ) .

 

  (Figure 4 )

9. The sweeping cycloid motor adopts domestic well-known brands, with long service life, stable and reliable, and low failure rate.

10. The hydraulic pipeline adopts the German standard technical sealing structure, which has good anti-vibration performance and high sealing reliability, and can achieve a leak-free sealing effect. Consultation hotline (WeChat with the same number)

11. Howard using high quality hydraulic solenoid valve group, two-way operation button, key electronic control unit using Siemens electrical switches, high reliability, long life (FIG. 5).

 

Figure 5

12. The hydraulic components are integrated and superimposed, and the electro-hydraulic control of the cab is centralized. It can easily operate the left and right vertical sweeping lifts, the left and right sweeping discs, the suction nozzle lifting, the back door opening and closing of the garbage bin, and the tilting and resetting of the garbage bin (Figure 6). ) .

 

Figure 6

 

13. Install the manual pump emergency system, and lift the dustbin in the state where the auxiliary engine is stopped, which is convenient for maintenance.

14. LED arrow light warning light is used at the rear to ensure safe driving operation. (Figure 7 ) .

 

Figure 7

15. Non-stainless steel parts are anti-rust treated by electrophoresis and are durable.

16. The auxiliary load-bearing beam is welded with square steel with a section length of 120mm, width of 60mm and thickness of 8mm, which ensures the safety of the whole vehicle and makes the vehicle safer.

17. Appearance computer design, high side skirt, curved surface transition, overall coordination and symmetry , resulting in low fuel consumption, low noise, streamlined appearance. (Figure 8 )

 

Figure 8

18. The vehicle can be equipped with snow shovel, lifting platform and anti-aircraft gun according to customer requirements. Make full use of space to achieve a multi-purpose vehicle.

Liberation Tiger VN Road Sweeper Parameter Table

*Note: This parameter is standard for the manufacturer, and the actual parameters vary according to customer needs.

Manufacturers Hotline (WeChat with the same number)

Goodsense Hand-Push Electric Sweeper advantages:

1.Filter material used in sophisticated equipment is adopted in filter system.

2.Adjustable disc brush and roller system could extend the service span.

3.Tires made of new materials could extend their service span.

4.It has appearance patented.

5.Dust collecting engine with large power of 120W could reduce the drifting of dust.

Application Area:

1.Lobby

2.Waiting Room

3.Factory

4.Village Road

If you have any other questions,please contact us directly.Our product are all with high quality.And we invite you to visit our factory.

Hand-Push Electric Sweeper

Hand-Push Electric Sweeper,Triangle Electric Sweeper,Warehouse Sweeping Machine,Hand Push Road Sweeper

ZHEJIANG GOODSENSE FORKLIFT CO.,LTD , https://www.goodsenseforklift.com