Why is the cocoa powder dryer dried with microwaves?

Why is the cocoa powder dryer dried with microwaves? The cocoa powder is a cocoa bean (seed) taken from the pods (fruits) of the cocoa tree, and is obtained from the process of fermentation, coarse crushing, peeling, etc. (commonly known as cocoa cake). ), the powder after degreasing and crushing the cocoa cake, that is, cocoa powder. Cocoa powder is divided into high, medium and low fat cocoa powder according to its fat content; it is divided into natural powder and alkalized powder according to different processing methods. Cocoa powder has a strong cocoa aroma and can be used in high-end chocolates, drinks, milk, ice cream, confectionery, pastries and other foods containing cocoa.
Cocoa Microwave Dryer Features:
1. Selective heating. Because water molecules also absorb microwaves, the higher the water content, the more microwave power is absorbed than the lower water content. This is the characteristic of selective heating, which makes use of this feature to achieve uniform heating and uniform drying.
2, energy efficient. The microwave also acts directly on the material, so there is no additional heat loss. The air in the furnace does not generate heat with the corresponding container, so the thermal efficiency is extremely high, and the production environment is also significantly improved. Compared with far infrared heating, it can be used. Electricity is 30%.
3. Short time and high efficiency. Microwave heating is also a process in which the object to be heated becomes a heating element without heat conduction. The microwave penetrates the inside and outside of the object from all sides and simultaneously achieves uniform heating in a short time, which greatly shortens the drying time.
4, easy to control, advanced technology. Compared with the conventional method, the device is ready to use; without thermal inertia, the operation is flexible and convenient; the microwave power is adjustable, and the transmission speed is adjustable. In microwave heating, drying, no waste water, no waste gas, is a safe and harmless high-tech.

Waste Engine Oil Distillation Plant

The Waste engine Oil Distillation Plant is used to refine waste engine oil, crude oil and fuel oil after pyrolysis process into diesel grade oil, gasoline or and base oil. The daily capacity of this plant is about 5-6 tons.

 

Flow-chat of waste engine oi Distillation Plant

Advantage of waste engine oi distillation plant

1. Unique and original manufacturing and technology with our own formula of our equipments in China;

2. Unique horizontal design, high oil output with about 90% oil yield and 100% conversion rate, highly effective and profitable;

3. Good quality end product oil as the substitution of standard diesel oil in usage;

Automatic submerged welding technology, ultrasonic nondestructive testing, both manual and the automatic safety devices;

4. Sync gas recycling system: fully burned after recycling and utilization, saving fuel and preventing pollution;

5. National patent, unique heat insulation shell: high efficiency temperature keeping, excellent energy-saving effect;

6. High condensing efficiency condensers with more oil output. Good quality oil, longer lifetime, and easy to clean;

7. National patent water film smoke scrubbers: efficient removal of the acid gas and dust of the smoke, environmental friendly to meet related national standards.

 

Technical Parameter of Waste engine Oil Distillation plant

NO.	Item	Technical Parameter
1	Suitable Raw Materials	Waste engine oil, Pyrolysis fuel oil, crude oil
2	Structure	Horizontal Type
3	Capacity(24 hours)	3.5-6.5Mt
4	Work Pressure	Normal Pressure
5	Oil Yield	80%-90%
6	Power	18 kw/H
7	Cooling Method	Cycle water
8	Condensers	4 pieces of Vertical condensers
9	Emission Treatment	New DE-sulfurization Smoke Scrubbers
10	Heating Method	Hot Air
11	Type of Installation	With Foundation
12	Noise dB(A)	≤85
13	Dimension of Reactor(mm)	Ф2200×6000 Ф2500×8800
14	Operating Mode	Semi-continuous Operation
15	Main Chamber Weight (MT)	10~13Mt
16	Total Weight(MT)	25~35Mt
17	Installation Space Required	35m*15m
18	End Product	Non-standard diesel oil
19	Manpower	1~2/shift
20	Shipment Requirement	2*40HC=Ф2200×6000 1*40HC+1*40FR=Ф2500×8800

 

Waste Engine Oil Distillation Plant

Distillation Plant,Oil Distillation,Waste Oil Recycling,Waste Engine Oil Recycling

Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclingthewaste.com