Cone crusher performance characteristics and working principle
(1) The machine adopts material layering and selection and crushing. The crushing chamber fills the feeding material, and the material undergoes all-round extrusion, shearing and boring in the crushing chamber to break and self-break, so that the crushing chamber wall avoids direct contact and effectively prevents the lining plates from wearing each other. and to avoid the material is a gold-contaminated, so that the machine reduce the degree of vulnerability consumable member, effectively extending the life of wear parts, crushing ratio is generally more than other similar devices.
(2) The crushing ratio of the machine is increased, the granularity of the product is very random, and the size can be adjusted arbitrarily. The crushing force of the cone has a certain relationship with the eccentric static torque and the rotational speed of the machine. By adjusting the gap of the crushing chamber, it is convenient to adjust the required crushing ratio.
(3) The technical performance index of the machine is stable, and the particle size of the product is almost independent of the wear of the lining.
(4) Easy to operate and install. Since the whole machine adopts secondary vibration isolation, the basic vibration is small, the working noise is small, and no large foundation and anchor bolts are needed for installation.
(5) Good iron performance. Because there is no rigid connection between the moving cone and the transmission mechanism, if the material is mixed with unbreakable objects, the moving cone temporarily stops moving, and the exciter will continue to rotate around the cone shaft, greatly reducing the failure rate.
(6) The unique design of the machine simplifies the grinding process and reduces the number of auxiliary equipment. The machine is full of feed, no need for a special feeder, full load start and stop. Operation, monitoring and control are very convenient; due to the fine product size, no vibrating screen is needed to form a closed circuit, which greatly saves equipment and infrastructure investment.
Second, the cone crusher working principle:
When the cone crusher is working, the rotation of the motor is rotated by a pulley or a coupling, a cone crusher drive shaft and a conical crusher cone under a urging of the eccentric sleeve. Therefore, the broken wall of the crushing cone is close to the surface of the rolling wall fixed on the adjusting sleeve, so that the ore is continuously subjected to impact, pressing and bending in the crushing chamber to realize the crushing of the ore. The motor drives the eccentric sleeve to rotate by the bevel gear, so that the crushing cone rotates. The crushing cone is sometimes close to and then leaves the fixed cone to complete the crushing and discharging. The joint between the support sleeve and the frame body is pressed by the spring. When the crusher falls into a non-breakable object such as a metal block, the spring is compressed and deformed to discharge foreign matter, thereby achieving insurance and preventing damage to the machine.
When the cone crusher passes through the crushing chamber or the machine is overloaded for some reason, the cone crusher spring insurance system realizes the insurance, and the cone crusher discharge port increases. The foreign matter is discharged from the crushing chamber of the cone crusher. If the foreign matter is stuck in the ore, the clearing system can be used to continue the enlargement of the ore discharge, so that the foreign matter is discharged from the crushing chamber of the cone crusher. Under the action of the spring, the cone crusher automatically resets the discharge port, and the cone crusher machine resumes normal operation. Crushing cavity surface covered with wear-resistant high manganese steel liner plate. The size of the discharge port is adjusted hydraulically or manually.
We are aiming to supply outstanding farming machinery around the world.
Features
1)Stainless Steel,
2)Large volume: 21liters,
3) Durable and hygienic: Heavy, bend and closededges, th resist even heavy influnces.
4) No weldings that might cause leakiness.
5) No blind corners, where feed and bacteria might accumulate.
6) No sharpe edges, that might hurt the sow and the piglets.
Feeding Pan,Automatic Pan Feeding,Pan Feeding System,Pans Feeding Line
Ningbo New Glory International Trading Co.,Ltd , https://www.stock-farming.com