Car beauty cleaning method summary
2023-09-25 02:08:48
There are more and more people who love car beauty. Among them, car washing is a major part of the car. Among them are washing machine, machine washing and manual washing, and 7 minutes quick washing.
1. Machine Cleaning The car is washed in a car wash. Car wash rooms are machines that are controlled by computers and work according to certain procedures. The main structures of the car wash house are: multiple long-haired roller brushes; multiple shower heads with different spray angles and shower heads filled with cleaning agent; computer; transmission mechanism and power source The car is driven into the car wash room and is first controlled by the computer. Spraying with clean water, positioning with a long hair brush, and rolling with a brush, washing with fresh water, washing with detergent, and the washing practice is slightly longer; washing with clean water is then performed; drying and drying operations are performed after washing.
The advantage of machine washing is that it is fast and easy to recycle and reuse water. The disadvantage is the high cost of car washing, and sometimes the satisfaction of car washing is unsatisfactory, and manual cleaning is necessary if necessary.
2. Manual cleaning Most car wash yards use manual car wash methods. Its car wash equipment is simple, mainly include: water source; electric hydraulic press; towel and brush etc.
There are many learning and skills for cleaning cars by hand. The following is the first description:
Car wash shop car wash step a, adjust the pressure of the spray gun and the shape of the spray column, these are done by adjusting the spiral on the water gun.
b. Wet the car with a low-pressure water column to wash away dirt and sand from the car's surface.
c. Impact the fender and chassis components with a high pressure water column. The high pressure water column should not touch the radiator (water tank) and condenser.
d. Use low pressure water column and towel (or soft brush) to flush the water while wiping the surface of the car. Do not use too much force. Clean the mud on the surface of the car and use medium pressure water to flush the entire surface of the car.
e. Wipe the whole surface of the car with a clean, sand-free towel or foam plastic. Wipe the entire surface of the car. At this time, you can use a large force. During the wiping process, you must wipe it step by step and open the door to wipe the door. Edges and borders must be wiped by the entire vehicle when rubbing, and should not be missed.
f. Close the door and wash the detergent with medium-pressure water column.
g, with a good texture of the field towel (not to lose hair) pull off the roof of water, the car to a dry place.
h. Open the door Clean the door, door frame, instrument panel, seat, floor mat, etc. with a clean, damp towel; clean and wring the towel to wipe all surfaces of the car, and air-dry afterwards.
3.7 minutes quick wash "7 minutes quick wash" process First of all, the Magic 1 product evenly sprayed on the surface of the car, wait about a minute, then rinse with a high pressure water gun.
Secondly, spray the Magic 3 product evenly on the surface of the car, wait for about two minutes, and wipe it off with a dry towel.
Finally, the car tires can be cleaned and polished.
In just seven minutes, the car was finished. The effect before and after the cleaning was obvious, greatly reducing the owner's waiting time, and the customer satisfaction was significantly improved.
Electric Motorcycle,Electric Motorbike,New Electric Motorcycles,Lithium Battery Racing Motorcycle
Wuxi Jiangyin Xufeng Electric Bicycle Co., Ltd. , https://www.relxrides.com