Superior Marine Ship Airbags for Floating Bridge

Superior marine ship airbags for floating bridge   

1.Usage of Marine Airbags

Ship Launching Marine Airbags, also known as roller bags or ship launching rubber balloon, are made of heavy-duty synthetic-tire-cord layers with inner and out rubber layers in long cylindrical balloon shape. Marine Airbags for Ship Launching and Dry Docking for barge can be used for n Brazil, Indonesia Shipyard especially for barges launching, pull to shore, vessels' haul out and ship landing work.

2.Comparison with other Launch Way

Rollers Bag is a innovative ship launching technology, comparing with "end-on launching", "side ship launching", "float-out". This ship launching technology overcomes the restrictions of fixed launching track of side-launch. Ship launching airbags are accepted by more and more shipyards world wide due to its advantages of saving time, saving investment, flexible, safety. The biggest vessel launched by ship launching airbags up to 100,000 DWT.

3.Material and constructure of Marine Airbag

Inflatable Marine Airbags are to be constructed of an out rubber layer, multilayer heavy-duty synthetic-tire-cord layers, and an inner rubber layer vulcanized firmly. Ship launching marine airbags are cylindrical balloon body, with two conical head and end mouth. Air tightness swivel and air inlet kits are screwed with end mouth. Refer below picture.

1. Synthetic-tire-cord layer - Reinforcement layer of the ship launching marine airbags which are made of rubber coated synthetic-tire-cord fabrics. Many synthetic-tire cord layers are twined at ideal angles by unique and patented "Holistic Wrapping Technology". To hold the internal pressure and to distribute the stress evenly. Buoder use the 1870 dtex/2 type synthetic-tire-cord fabric. The warp is over 95 cords per 100 mm in width, and the breaking strength is more than 310N per cord.

2. The outer rubber layer covers the outside of ship launching marine airbags. To protects the cord layers from abrasion and other external forces. This compound has sufficient tensile and tear strength to withstand any weather condition and hard usage.

4.Classification of Roller Marine Air Bags

Ship launching marine airbags are categorized by "ordinary airbags", "high-bearing capacity airbags", and "Super-high-bearing capacity airbags" according to the bearing capacity.

• QP Ordinary airbags - the air bag with 3, 4 or 5 layers of cord fabric 
• QG High-bearing capacity airbags - the air bag with 6, 7 or 8 layers of cord fabric
• QS Super-high-bearing capacity airbags - the air bag with 9, 10 or more layers of cord

The standard diameter of ship launching marine airbags (D) varies such as 0.8m, 1.0m, 1.2m, 1.5m, 1.8m and 2.0m, 2.5 meters etc. The standard effective length of air bag (EL or L) is from 6m to 26m, which should be specified by the user. Other specification ship launching airbags also can be supplied upon request.

5.Performance Parameters of Offhshore marine ships pneumatic rubber airbag

Prior to delivery of the ship launching marine airbags, we test every air bag .All Evergreen Maritime ship launching marine airbags are manufactured and tested comply with  ISO 14409 "Ships and marine technology - ship launching air bags certificated by CCS, LR, DNV. 

6.examples of  marine ships pneumatic rubber airbag

7.Large factory work shop and good environment

If you need,please contact me directly:
 
Ada zheng
Mob:+8617663929366

Large moulds are made into injection moulds and metal moulds, which can produce die-casting or injection molded products according to customer needs, such as auto parts molds, etc., which can produce structural strength and stiffness, surface hardness and surface roughness in automobile, motor industry, aeronautics and Astronautics, transportation and so on. The processing precision of D has higher requirements for large parts. The company has many years of experience in manufacturing large molds, efficient, safe and environmentally friendly, and can use raw materials according to customer requirements.

NOTE: All products are photographed in factories

           just  use as technology sample

Large Mould Manufacturing

Large Mould Manufacturing,Injection Mold Abs Plastic Mold,Large Injection Mould,Auto Parts Mold

Dongguan City Ruizhun Precision Metal Co., Ltd , http://www.rzjmdiecasting.com