PPR Pipe Fitting Elbow Mould (16~160mm)
- Shaping Mode: Injection Mould
- Mould Cavity: Multi Cavity
- Process Combination Type: Compound Die
- Runner: Cold Runner
- Installation: Mobile
- Standard: HASCO
- Size: 50mm
- Specification: ISO9001: 2000
- HS Code: 8480719090
- Surface Finish Process: Polishing
- Plastic Material: PPR
- Application: Household Appliances
- Design Software: AutoCAD
- Certification: ISO
- Customized: Customized
- Trademark: JZ
- Origin: China
Size: 16~160MM
Competitive price and Short delivery time
Name | Â PPR Pipe Fitting Elbow Mould |
Plastic material | PPR |
Steel of Cavity & Core | DIN 1.2738 |
Steel of Mouldbase | S50C. LkM standard^ etc |
Nos of Cavity | Customized |
Hardness of Cavity & Core | 48-52HRC |
Hardness of Wear Parts | 55-55HRC |
Core pulling system | Motor /oil cylinder/ stripping plate, angel pin^ etc |
Mould Accessories | DME/HASCO Standard |
Cooling system | In core baffle cooling and in cavity plate chain drilling type cooling |
Surface finish | Diamond polish |
Molding  life | 1.200, 000shots |
Runner | Cold or Hot |
Delivery time | 55 work days |
Packing | wooden case |
Payment | T/T L/C |
HST Three Point Bending Tester Elastic modulus in bending (i.e., flexural modulus), stress-strain behavior, and failure limits in bending all can be obtained using the simple sample geometry of a 3-point bend test. ASTM D790 or ISO 178 covers flexural properties for plastics; ASTM E855 is used for properties of flat metallic spring materials; ASTM C1684 or C1161 covers 3-point bend testing of ceramics.
In a 3-point bend test, the convex side of the sheet or plate is placed in tension, and the outer fibers are subjected to maximum stress and strain. Failure will occur when the strain or elongation exceeds the material`s limits.
Fracture toughness can be determined using a three-point flexural test. In this case, a pre-notched sample is used and the procedures of ASTM E-1290 or ISO12135 can be followed. Fatigue properties can be obtained using ASTM D7774. For medical applications, ASTM F2606 is used for 3-point bend testing of balloon-expandable vascular stents and stent systems.
Three Point Bending Tester
Three Point Bending Tester,Three Point Bending Flexural Tester,Three Point Bending Tensile Compression Tester,Three Point Bending Testing Machine
JINAN KASON TESTING EQUIPMENT CO., LTD. , http://www.hstester.com