Hot Selling Full Automatic Combined Terminal Crimping Machine (single head)

2020-10-23 10:15:59
  • Driven Type: Pneumatic
  • Warranty: 12 Months
  • Power Supply: Single Phase AC220 50/60Hz
  • Temperature Range: Around 15-30 Degrees
  • Specification: 1000*700*1550MM
  • Condition: New
  • Automatic Grade: Automatic
  • Compressed Air: 0.4MPa - 0.5MPa (with Air Volume About 130ni/Min-
  • Transport Package: Seaworthy Package
  • Origin: China
Features:
1.adjust the blade by computer,no gasket
2. The back end can be semi-stripped
3. Operation screen KINCO7 inch full english version
4.Pneumatic parts is TAIWAN Airtac
5. Control: 32 full SCM control system
6. Servo: Delta servo
7. Guide rail with silver, decelerator PHT
8. Detection of Japanese keenshi. Omron
9. The rear end is suitable for horizontal, straight OTP mould

Product specifications:

1.Model: high speed automatic terminal press (double end pressing)
2.Machine function: the computer controls both ends of the pressure, blade, peeling, semi-stripping and detection
3.Production capacity: 0.7sec/bar at both ends of the length 40MM
4.Speed: 40MM an hour 4000 root (feed speed 3000secMAX)
5.Wire cut length: 40-9999mm
6.Cut off accuracy: the deviation is 0.5MM when the cutting length is less than 100MM, and the cutting length is greater than 100MM and the deviation is positive and negative 1.0MM
7.Stripping length: 1 side 0.1-9.0 (semi-stripping 3.0-9.0 MM) 2 side 1.0-9.0MM (half stripping length 3.0-9.0 MM)
8.Press ability: 19600N(2T) mute terminal machine 2 (using mould AS42.AS40.AAE30)
9.Control mode: 32-bit microcomputer system
10.Check  function: check whether there are any wires, check the wire too tight, detect abnormal pressure, check the abnormal
11.Power supply: single phase AC220 50/60hz
12.Compressed air: 0.4mpa - 0.5mpa (with air volume about 130NI/min- 180NI/min)
13.Temperature range: around 15-30 degrees
14.Machine size: 1000*700*1550MM (not including the protrusions)
15.Weight: 460KG
Hot Selling Full Automatic Combined Terminal Crimping Machine (single head)




 

Mold is a kind of industrial product that can make the material take shape in a certain way in a specific structure form.
Almost all industrial products, from airplanes and automobiles to tea cups and nails, must be moulded.
The high precision, high consistency and high productivity of moulds are incomparable to any other machining methods.
Mould determines the product quality, benefit and new product development ability to a great extent.
So the mold has the "mother of industry" honorary title.

Mould Design

Mould Design,Plastic Mold Design,Injection Mold Design,Crown Molding Designs

Chongqing Jin Te Rui Machine Co.,Ltd , https://www.die-casting-machine.com