Energy Saving High Efficiency Permanent Magnetic Screw Air Compressor

       ZAKF compressor manufacturing co.,ltd is a professional air compressor research, development and production of large enterprises. ZAKF is one of China large professional screw air compressor manufacturer, and the OEM air compressor platform in china.

      ZAKF compressor Design, manufacturing at a high starting point, advanced technology, superior level of systematization, its core competencies to guide the development trend of the industry, stable and reliable. ZAKF import advanced technology from europe, through constant practice and improvement, design a new generation of "ZAKF" air compressor. Improved quality assurance manual, advanced production process, control management program files comprehensive, standardized, ensuring high quality brand name products "ZAKF", stable and durable. High quality, intimate service get the praise from users all over the world.




     






 
We offer you a caring controller interface,it will guide you very easily control of air compressor,to provide the source

Humanized window prompts,
showing a variety of languages including stick out a mile,Chinese,Words,human--computer exchange of information convenient,and can upgrade the software.

Electric control system
Reliable quality of Schneider electric element to ensure the long-term,without machine avoidance operation,low energy consumption,reduced low operation cost.

Safe,efficient air filter system
Long life filter design,filter large area,small air breathing resistance,in deep keep air clean and free of impurities.
Efficient oil filter
More effectively remove impurities in lubricating oil quality and deterioration ,the maximum in deep the service life of the host.
Efficient separation of oil and gas
Large volume of oil and gas in the whole barrel the internal pressure ratio optimization ,stability fixed source
Oil and gas separation effect is excellent,by cyclone separation,gravity separation, oil the three stage of the oil separation and fine processing .after the compressed air oil products the amount is controlled in an ideal range.

Body damping device
Effectively reduce the rotation of the body to avoid vibration,low frequency noise by solid resonance produced by the transmission .
Elastic coupling
With the main motor of screw extrude the elastic shaft coupling then ,the maximum guarantee.to the credibility of the connection,transmission high efficiency.

High quality motor
Using high-quality name brand motor,protection grade IP23,insulation grade f ,also according to the user special requirement separate design.
 




 

"Gravity Die Casting. A permanent mould casting process, where the molten metal is poured from a vessle of ladle into the mould, and cavity fills with no force other than gravity, in a similar manner to the production of sand castings, although filling cn be controlled by tilting the die."

Gravity Die Casting

Sometimes referred to as Permanent Mould, GDC is a repeatable casting process used for non-ferrous alloy parts, typically aluminium, Zinc and Copper Base alloys.

The process differs from HPDC in that Gravity- rather than high pressure- is used to fill the mould with the liquid alloy.

GDC is suited to medium to high volumes products and typically parts are of a heavier sections than HPDC, but thinner sections than sand casting.

There are three key stages in the process.

1. The heated mould [Die or Tool] is coated with a die release agent. The release agent spray also has a secondary function in that it aids cooling of the mould face after the previous part has been removed from the die.
2. Molten metal is poured into channels in the tool to allow the material to fill all the extremities of the mould cavity. The metal is either hand poured using steel ladles or dosed using mechanical methods. Typically, there is a mould [down sprue" that allows the alloy to enter the mould cavity from the lower part of the die, reducing the formation of turbulence and subsequent porosity and inclusions in the finished part.
3. Once the part has cooled sufficiently, the die is opened, either manually or utilising mechanical methods.

Advantages

• Good dimensional accuracy
• Smoother cast surface finish than sand casting
• Improved mechanical properties compared to sand casting
• Thinner walls can be cast compared to sand casting
• Reverse draft internal pockets and forms can be cast in using preformed sand core inserts
• Steel pins and inserts can be cast in to the part
• Faster production times compared to other processes.
• Once the tolling is proven, the product quality is very repeatable.
• Outsourced Tooling setup costs can be lower than sand casting.

Gravity Casting Parts

Gravity Casting Parts,Aluminum Alloy Gravity Casting Parts,Aluminum Gravity Die Casting Parts,Gravity Casting Aluminum Parts

HSI INDUSTRIEL LTD , https://www.hsiindustriel.com