Inflatable Yokohama Rubber Fender
Inflatable Yokohama Rubber Fender
Inflatable Yokohama Rubber Fender is designed without chain and tyre net. Therefore, it has lower weight than traditional chain and tyre net rubber fenders. Meanwhile, it is an ideal type fender for some small and medium size vessels.Features:
Â
- High energy absorption and low reaction force;
- Light weight and high compression deformation;
- Good floating performance, can rise and fall with the ebb and flow of tides and the movements of ship;
- Easy installation and long service life.
PRODUCT INTRODUCTION
Specifications:
Â
Type (D*L) | Initial Internal Pressure 0.05Mpa | Initial Internal Pressure 0.08Mpa | ||||
Guaranteed Energy Absorption (KN/m) | Reaction Force (KN) | Hull Pressure  at GEA (Kpa) | Guaranteed Energy Absorption (KN/m) | Reaction Force (KN) | Hull Pressure  at GEA (Kpa) | |
0.5*1.0 | 6 | 64 | 132 | 8 | 85 | 174 |
0.6*1.0 | 8 | 74 | 126 | 11 | 98 | 166 |
0.7*1.5 | 17 | 137 | 135 | 24 | 180 | 177 |
1.0*1.5 | 32 | 182 | 122 | 45 | 239 | 160 |
1.0*2.0 | 45 | 257 | 132 | 63 | 338 | 174 |
1.2*2.0 | 63 | 297 | 126 | 88 | 390 | 166 |
1.35*2.5 | 102 | 427 | 130 | 142 | 561 | 170 |
1.5*3.0 | 153 | 579 | 132 | 214 | 761 | 174 |
1.7*3.0 | 191 | 639 | 128 | 267 | 840 | 168 |
2.0*3.5 | 308 | 875 | 128 | 430 | 1150 | 168 |
2.5*4.0 | 663 | 1381 | 137 | 925 | 1815 | 180 |
2.5*5.5 | 943 | 2019 | 148 | 1317 | 2653 | 195 |
3.0*5.0 | 965 | 1815 | 148 | 1341 | 2359 | 198 |
3.0*6.0 | 1184 | 2243 | 152 | 1646 | 2916 | 203 |
3.3*4.5 | 1175 | 1884 | 130 | 1640 | 2476 | 171 |
3.3*6.5 | 1814 | 3015 | 146 | 2532 | 3961 | 191 |
Note: other sizes can be made as per customers'Â request. |
Â
The pipeline heat shrink coating system designed for corrosion protection of straight pipes, fittings, bends, elbows and other irregular configurations. It consists low pre-heat modified bitumen sealant adhesive and thick-wall irradiated cross linked polyolefin. When heated the backing layer shrinks and the adhesive flows and forms a reliable corrosion protection seal onto metal and adjacent coating surfaces. It cons
Heat Shrink Tape
It installed by wrapping the tape on the pipe joints ,fittings ,bends ,elbows etc .After the shrinking of the tape ,the closure patch should be installed onto the overlap of the tape.
heat shrinkable sleeves,heat shrinkable tape
Jining Xunda Pipe Coating Material Co.,Ltd , https://www.alta-altene.com