Clamp End Stailess Steel Body Pneumatic Angle Seat Valve Piston Cotrol with ABS Plastic Cap

2020-10-04 05:14:47
  • Model NO.: 1/4"~4"(DN10-DN100)
  • Media: Gas, Oil, Water, Acid
  • Connection Mode: Clamps
  • Material: Stainless Steel Body/ABS Cap
  • Working Pressure: 0.1-1.6MPa
  • Port Size: Dn10,15,20,25,32,40,50,65,80,100
  • Acting: Double Acting,Normally Open/Cloase(No/Nc)
  • Manual Overrides: with Manual Overrides Device(Optional)
  • Trademark: neutral brand or customizable
  • Specification: 1/2"~4"(DN15~DN100)
  • HS Code: 8481202000
  • Certification: GS, RoHS, CE, ISO9001
  • Standard: Standard
  • Power: Pneumatic
  • Type: Single Seater
  • Air Control Supply Pressure: 0.3--0.8MPa
  • Actuator Cylinder Size: 27/40/50/63/90/90al/125al
  • Actuator Material: Stainless Steel or ABS Plastic
  • Optional Accessories: Ep-Positioner,Solenoid Valve,Limit Switch
  • Transport Package: Packing with Plywood Case
  • Origin: China
Clamp end stailess steel body pneumatic angle seat valve piston cotrol with ABS plastic cap
Design feature:
Stainless steel or gunmetal housing with sleeve, clamped or welded connection
High flow rate
Over 3 years long service life, 3 million cycles loaded test.
Trusted inner parts for long cycle life
Large accessory program with stroke limitation and feedback
Robust actuators with modular accessory program
Investment casting

SPECS.
Size: 1/4"~4"(DN10-DN100)
P/N: 1.6MPa
Meium: neutral-water/oil/gas,steam,organic solvent,weak acid,weak alkaline
Fluid temp. : -50ºC--230ºC
Ambient temp: -10ºC--80ºC
Operation: pneumatic
Control medium: neutral air
Air control supply pressure: 0.3--0.8MPa

Material:
Body: ASTM-A351 CF8/CF8M
Seat: PTFE,RPTFE,PPL
Stem: ANSI-304/ANSI-316
Seal: NBR,Viton,Fluororubber
Cap: PA6,ABS,stainless steel ASTM-A351 CF8/CF8M
Thread: BSP;BSPT;NPT;DIN;JIS;G;RC
Connection: threaded,flange,butt weld/socket weld/clamp(fast-installation)

Operation
angle seat piston valve is a pneumatically-controlled valve with a piston actuator providing linear actuation to lift a seal off its seat. The seat is set at an angle to provide the maximum possible flow when unseated. Angle seat piston valves are particularly suited to applications where high temperatures and large flowrates are required, such as steam or water. When used in reverse some models of angle seat piston valve will eliminate water hammer when operated.

Why choose us ?
We not only deisgn and manufacture valves, but also handling in valve mould tooling,design&development around Wenzhou.

*More complete drawing and technical specs pls contact us.
Clamp End Stailess Steel Body Pneumatic Angle Seat Valve Piston Cotrol with ABS Plastic Cap
Clamp End Stailess Steel Body Pneumatic Angle Seat Valve Piston Cotrol with ABS Plastic Cap
Clamp End Stailess Steel Body Pneumatic Angle Seat Valve Piston Cotrol with ABS Plastic Cap


 

Instruction

Automatic Jam Center Core Filling Snacks Extruding Line can produce many kinds of extrusion food snack food using variety of grain as raw materials with advanced double screw extrusing technology.

Automatic Jam Center Core Filling Snacks Extruding Line can produce manu other leisuire snacks food by changing moulds and assistant equipments in different shapes. This automatic jam center core filling snacks extruding line has superior characteristics, such as "applied to many grain materials, convenient operation and mainterance, low power consumption, high output.


Flow

Mixer→ Screw conveyor → Extruding→ Core Filling→ Shaping → Roasting → Flavoring Coating → Cooling

Core Filling02


Core Filling Snacks Extruding Line

Core Filling Snacks Machine,Core Filled Food Extruder,Core Filling Snack Extruder Machine,Snacks Processing Line

Jinan Darin Machinery Co., Ltd. , https://www.globaldarin.com