Sand Suction Dredge Pump

2018-10-12 05:04:19
  • Model NO.: TZG TZGH
  • Working Pressure: High Pressure Pump
  • Position of Pump Shaft: Horizontal Pump
  • Mounting Height: Suction Centrifugal
  • Usage: Pump
  • Material: High-Chromium Alloy A05 A07
  • Factory: Yes
  • Color: as Your Requirement
  • Model: Equivalent G Gh
  • Fuel: Electric Motor or Diesel Engine
  • Transport Package: Wooden Case
  • HS Code: 8413709990
  • Impeller Number: Single-Stage Pump
  • Influent Type of Impeller: Single Suction Pump
  • Pump Casing Combined: Horizontal Split Pumps
  • Impeller: Closed
  • Size: 4-14 Inches
  • OEM: Yes
  • After-Sale Service: Yes
  • Package: in Wooden Case
  • Medium: Strong Abrasion Slurry, High Concentration Slurry
  • Trademark: Boda
  • Origin: Shijiazhuang
Sand Suction Dredge Pump Product description:

Gravel pumps are designed for continously handling the most difficult hype BG(H) gigher abrasive slurries which contain too big solids to be pumped by common pump. They are suitable for delivering slurries in Mining, Explosive sludge in metal melting. Dredging in dredger and course of rivers, and other fields. Type BGH pumps are of high head ones.

Construction of this pump is of single casing connected by means of clamp bands and wide wet passage. The wet parts are made of Ni-hard and high chromium abrasion-resistance alloys. The discharge direction of pump can be oriented in any direction of 360 degree. This type of pump possesses the advantages of easy installation and operation, good performance of NPSH and abrasion-resistance.

BG(H)  Gravel Sand Slurry Pump Performance Table 		 
 

Pump
Model
Allowable
Max. Power
Clear Water Performance		    

Capacity Q
Head
H(m)
Speed
n(r/min)
Max.Eff.
η%
NPSH
(m)
Impeller 
Dia.		  

m 3 /h
l/s		  

100BG-D
60
36-250
10-70
5-52
600-1400
58
2.5-3.5
378		  
150BG-E
120
126-576
35-160
6-45
800-1400
60
3-4.5
378		  

200BG-S
560
216-936
60-260
8-52
500-1000
65
3-7.5
533		  
200BGH-S
560
180-1440
50-400
24-80
500-950
72
2.5-5
711		  
250BG-G
600
360-1440
100-400
10-60
400-850
65
1.5-4.5
667		  

250BGH-G
600
288-2808
80-780
16-80
350-700
73
2-10
950		  

300BG-G
600
576-3024
160-840
8-70
300-700
68
2-8
864		  
350BG-G
600
720-3600
200-1000
18-44
300-500
70
3-9
1016		  
350BGH-TU
1200
324-3600
90-1000
26-70
300-500
72
3-6
1270		  

Sand Suction Dredge Pump
Sand Suction Dredge Pump

Sand Suction Dredge Pump
 

The Welding Machine is a machine which can use the local heating method to connect the separated materials or parts into one.

High frequency induction welding machine is a induction heating device that connects the welding material to a certain temperature by induction current, melting the solder, and connecting two metals or materials with different materials.

High frequency welding machine can not only be used for welding of various metal materials, can also be used for diathermy, smelting and heat treatment technology.

The high frequency induction Welding Equipment is mainly used for the welding of the divergent tube components. The equipment adopts vertical design, which is composed of frame, fixture, electric control system, high frequency induction heating equipment, cooling system and so on.


The main heating modes of the high frequency welding machine include the heating of the iron, the flame heating, the resistance heating, the induction heating, the impregnation heating and the heating in the furnace and so on. High frequency welding machine is commonly used in welding process, mainly according to the use of equipment and working principle. If there are heat sources, there are infrared, electron beam, laser, plasma and glow discharge welding. According to the working process, there are contact reaction welding and diffusion welding. Contact reaction welding is the use of solder and the parent material to produce liquid phase filling joint gap. Diffusion welding is to increase the time of heat insulation diffusion, make the weld and the base material fully homogenized, so as to obtain the joint with the same properties of the parent material. Almost all heat sources can be used as heat source for welding, and the welding is classified according to this.

Suitable range
1, the welding of cemented carbide cutters. Such as lathe tool, milling cutter, twist drill, pliers, hammers, wrenches, thread cutting pliers and so on.
2, the welding of the diamond cutter head, such as the welding of the diamond saw blade, the grinding tool and the sawtooth welding.
3, the drilling of the drilling bits, such as a word bit, and the welding of the angle bit.
4, the composite welding of the metal materials such as brass, copper, stainless steel pan and so on. The heat treatment of automobile and motorcycle parts, the hot piers of standard parts, the hot piers of nut, and the heating of copper standard materials.

Welding Machine

Welding Machine,Welding Equipment,Automatic Welding Machine,Automatic Welding Equipment

Dongguan Rener Automation Technologies Co.,Ltd , http://www.rener-automation.com