Lean Tube Joint Hardware (h-2)

2020-03-08 12:09:05
  • Model NO.: h-2
  • Processing Type: Metal Spinning
  • Mould: Multistep Progressive Dies
  • Process: Forming Process
  • Tolerances: 0.01mm
  • Trademark: xianghai
  • Specification: Thickness: 2.3mm
  • HS Code: 391740000
  • Type: Cold Stamping
  • Material: Stainless Steel
  • Fine Blanking: Multi-Position
  • Industry: Metal Stamping Parts
  • Customized: Customized
  • Transport Package: Wooden Box, Carton
  • Origin: Guangdong Dongguan
Basic Info
Model NO.: H-1
Thickness: 2.5mm
Application: PE Pipe, Lean Tube, ABS Pipe
Trademark: HLX
Origin: Guangdong, China
Type: Metal Joint

Model No: H-1
Surface Treatment: Painting, Chrome Plated
Specification: CE, ISO
HS Code: 391740000
Product Description
Specification

Model No Application
H-1 for two composite tubes into T-type structure
H-2 for three composite tubes into three-dimensional structure of 90 degrees
H-3 for four composite tubes into three-dimensional structure of 90 degrees
H-4  for four composite tubes in a cross structure
H-5 for five composite tubes into three-dimensional structure of 90 degrees
H-6 for two composite tubes into 90 different surface structure
H-7  two composite tubes used to have unilateral arbitrary angle structure, mainly to strengthen overall
H-8 for two composite pipe coupling can be fitted into the movable structure, mainly for the hinge structure
H-9 for two composite pipe composite pipe structure and the other is connected to. Main strengthen bearer and a side profile.
H-10 for two composite pipe coupling as to be rotatable relative to the T-shaped structure
H-11 for two pipe coupling in line, mainly used to strengthen the structure.
H-12 for three composite tubes have arbitrary angle into bilateral structure, mainly used to enhance the overall strength.
H-13 for strong coupling between the composite tube and the plate.
 

Air Handling Systems
Air handling unit as terminals of Central Air Conditioner . Equipped with main air cooled chiller or Water Cooled Chiller to cool or heat the target place. Bigger than Fan Coil unit. Also purify indoor air to make people feel comfortable.

Air handling unit series:
1. Ceiling Type Air Handling Unit
Air flow 1,000m3/h-30,000m3/h, Coil type 4rows/6rows/8rows
2.Horizontal Type Air Handling Unit
Air flow 1,000m3/h-50,000m3/h,Coil type 4rows/6rows/8rows
3. Vertical Type Air Handling Unit
Air flow 1,000m3/h-50,000m3/h,Coil type 4rows/6rows/8rows
4. Modular Type Air Handling Unit
Air flow 3,000m3/h-30,0000m3/h, Coil type 4rows/6rows/8rows
5.Chilled Water Air Handling Unit
Water chilled type, Air flow 1,000m3/h-30,0000m3/h, Coil type 4rows/6rows/8rows
6. DX Type Air Handling Unit
DX type, Air flow 1,000m3/h-30,0000m3/h, Coil type 4rows/6rows/8rows
7.Medical type air handling unit
8. Cabinet Type Air Handling Unit
9.Composed Type Air Handling Unit
10.Hygienic Type Air Handling Unit

Characteristics
1.Amrta air handling unit with colorful steel and galvanized panel as its interior and exterior panel. Inner stuff is the high density polyurethane foam. Case thickness 25mm or 50mm to strength the unit and avoid air leakage.
2.Filter, primary filter G4 is standard. Medium F7/f8 and HEPA filter H13 is an optional.
3.Adopt pure and seamless copper tube and hydrophilic aluminum fin. Make high efficiency heat exchanging.
4.ESP is stepless control and there are different ESP for options. At the same time, varies air outlet directions and coil rows are for options.
5.Coils type. 4rows/6rows/8rows.
6.Condition type. 100%Fresh air/return air.
7.Service door with sight glass window

Air Handling Systems

Air Handling Systems,Air Handling Unit Systems,Ventilation System Air Handling,Systems Type Air Handling

Jinan Amrta Air Conditioning Co.,Ltd , https://www.waterchiller.pl