Lab Chamber Programmable Constant Temperature and Humidity Test Equipment
2018-08-17 03:01:13
Model NO.: QTH-V150B
Temp. Range: -20 Degree C ~+150 Degree C
Application: Industry, School, Hospital, Lab
Refrigerant: R23/R507
Humidity Range: 20% -98% Rh
Structure: Vertical Model
Weight: 100-800kg
Trademark: Q1-TEST
Transport Package: Strong Plywood Case
Specification: 500x600x500mm
Origin: Dongguan, China
HS Code: 8479899990
Programmable High And Low Temperature Alternating EnvironmentalTest Equipment
                   Â
Descriptions:
The test equipment simulates a full range of temperature and humidity conditions to test reliability, durability, climatic, freezing resistance, quality assurance, thermal endurance etc.
Features:
1, Chamber exterior material is stainless steel with environmentally baking paint resists corrosion and provides impact resistance. Interior material is SUS304# stainless steel with excellent heat resistance and easy to clean.
2, large LCD color touch screen controller is designed to save chamber programming and setup time with temperature limit and alarm to protect your product.
3, Safety relay connection is provided to protect your device under test by removing power to it when the chamber is not running.
4, RS-232 communications is for computer connection, programming can be set on computer by software, monitor testing process and automatically execute power on/off functions.
5, Fog-free viewing window and interior light makes viewing workspace freely and observe the test under best conditions.
6, Adjustable product shelf slides out for easier product access. Shelf design is non-tipping and supports large product loads.
7, Left side of chamber with diameter 50mm cable port for power-on test.
8, Optional electronic humidity sensor is used on all test chambers for accuracy and minimal maintenance.
Conform standards:
IEC68-2-1 (GB-2423.1-2008) Testing A: Low temperature testing method
IEC68-2-2 (GB-2423.2-2008) Testing B: High temperature testing method
MIL-STD-202F (GJB360.8-87) High temperature life testing
MIL-STD-810D (GBJ150.3) High temperature method
MIL-STD810D (GBJ150.4) Low temperature method
IEC68-2-3 (GB2423.3-93) Testing Ca: Constant moist heat testing method.
IEC68-2-30 (GB2423.4-93) Testing Db: Alternate moist heat testing method.
MIL-STD-810D (GJB150.9-93) Moist heat testing method
Â
Optional Accessories:
Cable Port: Size of cable port is available for Ф100mm
Water purifier RO 80: Continuously provide purified water for humidifying heater and wet-bulb
Dehumidifier: The rotation regenerating dehumidifier M-120 ensures precise control of low humidity (10C, 15%RH) for electrostatic reliability tests.
Defrosting Device: The chamber automatically detects and melts the frost on the evaporator when operating below 0ºC in order to allow continuous operation
Electronic humidity sensor: Precision Humidity Sensor with stainless steel protection tubeÂ
Chamber Dimensions:
                   Â
Descriptions:
The test equipment simulates a full range of temperature and humidity conditions to test reliability, durability, climatic, freezing resistance, quality assurance, thermal endurance etc.
Features:
1, Chamber exterior material is stainless steel with environmentally baking paint resists corrosion and provides impact resistance. Interior material is SUS304# stainless steel with excellent heat resistance and easy to clean.
2, large LCD color touch screen controller is designed to save chamber programming and setup time with temperature limit and alarm to protect your product.
3, Safety relay connection is provided to protect your device under test by removing power to it when the chamber is not running.
4, RS-232 communications is for computer connection, programming can be set on computer by software, monitor testing process and automatically execute power on/off functions.
5, Fog-free viewing window and interior light makes viewing workspace freely and observe the test under best conditions.
6, Adjustable product shelf slides out for easier product access. Shelf design is non-tipping and supports large product loads.
7, Left side of chamber with diameter 50mm cable port for power-on test.
8, Optional electronic humidity sensor is used on all test chambers for accuracy and minimal maintenance.
Conform standards:
IEC68-2-1 (GB-2423.1-2008) Testing A: Low temperature testing method
IEC68-2-2 (GB-2423.2-2008) Testing B: High temperature testing method
MIL-STD-202F (GJB360.8-87) High temperature life testing
MIL-STD-810D (GBJ150.3) High temperature method
MIL-STD810D (GBJ150.4) Low temperature method
IEC68-2-3 (GB2423.3-93) Testing Ca: Constant moist heat testing method.
IEC68-2-30 (GB2423.4-93) Testing Db: Alternate moist heat testing method.
MIL-STD-810D (GJB150.9-93) Moist heat testing method
Â
Optional Accessories:
Cable Port: Size of cable port is available for Ф100mm
Water purifier RO 80: Continuously provide purified water for humidifying heater and wet-bulb
Dehumidifier: The rotation regenerating dehumidifier M-120 ensures precise control of low humidity (10C, 15%RH) for electrostatic reliability tests.
Defrosting Device: The chamber automatically detects and melts the frost on the evaporator when operating below 0ºC in order to allow continuous operation
Electronic humidity sensor: Precision Humidity Sensor with stainless steel protection tubeÂ
Chamber Dimensions:
Model | Temperature/Humidity Ranges | Internal Dimension(W x H x D)cm | Outer Dimension(W x H x D)cm |
QTH-V80A |
0ºC~+150ºC 20%~98%RH |
40x50x40 | 60x110x95 |
QTH-V150A | 50x60x50 | 70x120x105 | |
QTH-V225A | 50x75x60 | 70x135x115 | |
QTH-V416A | 70x85x70 | 90x145x125 | |
QTH-V800A | 100x100x80 | 120x160x135 | |
QTH-V1000A | 100x100x100 | 120x160x155 | |
QTH-V80B |
-20ºC~+150ºC 20%~98%RH |
40x50x40 | 60x110x95 |
QTH-V150B | 50x60x50 | 70x120x105 | |
QTH-V225B | 50x75x60 | 70x135x115 | |
QTH-V416B | 70x85x70 | 90x145x125 | |
QTH-V800B | 100x100x80 | 120x160x135 | |
QTH-V1000B | 100x100x100 | 120x160x155 | |
QTH-V80C | Â | 40x50x40 | 60x110x95 |
QTH-V150C |
-40ºC~+150ºC 20%~98%RH |
50x60x50 | 70x120x105 |
QTH-V225C | 50x75x60 | 70x135x115 | |
QTH-V416C | 70x85x70 | 90x145x125 | |
QTH-V800C | 100x100x80 | 120x160x135 | |
QTH-V1000C | 100x100x100 | 120x160x155 | |
QTH-V80D | Â | 40x50x40 | 60x110x95 |
QTH-V150D |
-70ºC~+150ºC 20%~98%RH |
50x60x50 | 70x120x105 |
QTH-V225D | 50x75x60 | 70x135x115 | |
QTH-V416D | 70x85x70 | 90x145x125 | |
QTH-V800D | 100x100x80 | 120x160x135 | |
QTH-V1000D | 100x100x100 | 120x160x155 | |
Note:20%~98%RHÂ is standard range, optional customized 10%~98%RHÂ or 5%~98%RH | |||
 Dimensions are also available for customized. |
Â
Â
Â
Technical Specifications:
Â
Â
Â
Technical Specifications:
Â
Control Mode | Balanced Temperature and Humidity Control System |
Operating Temp. & Humid. Range | +5ºC ~ +35ºC; <85%R.H. |
Temp. range | A=0ºC, B=-20ºC, C=-40ºC, D=-70ºC ~ +100ºC(150ºC) |
Humid. range |
20% ~98%R.H. (Optional: 5%~98%R.H.) |
Temp. & Humid. fluctuation | ±0.5ºC; ±2.5%R.H. |
Temp. & Humid. uniformity | ≤2.0ºC; ≤3%R.H. |
Temp. & Humid. Deviation | ≤1.0ºC; ≤2%R.H. |
Temp. Heating Time | 0ºC ~ +100ºCwithin 30min; -20ºC ~ +150ºCwithin 45min |
Temp. Cooling Time | 20ºC ~ -40ºCwithin 60min; 20ºC ~ -70ºCwithin 85min |
Power Supply | AC380V, 50/60HZ, Three-phase (Specified by User) |
Exterior Material | stainless steel with baking paint |
Interior material | SUS304# Stainless steel |
Insulation material | Rigid Polyurethane foam |
Refrigeration system | Mechanical cascade refrigeration system; Fin type radiator |
Circulation system | Mechanical convection system |
Humidification Water Supply | Automatic water regulating, recoverable supply system, water shortage alarm system |
Water quality | Distilled water only, 20L Water tank capacity |
Controller | HL-1000 Touch Screen Controller |
Safety devices | Overheat protector Switch, Compressor overload protector Switch water shortage protector Switch, Humidifier protector Switch Fault alarm system |
Accessories | Viewing window, Chamber Illumination, Cable port ø50mm, Product shelf slides 2 pieces, universal casters HL-1000 touch screen controller |
Â
Note:
1, The performance values are no specimen inside the test area.
 2, At 20ºC ambient temperature, relative humidity 65%rh, rated voltage
 3, According to IEC60068-3-5:2001 and IEC60068-3-6:2001
 4, The above specifications are for reference only.
if you have any other request ,please feel free to contact us . it can be made base on your request;thanks!!!
Â
Note:
1, The performance values are no specimen inside the test area.
 2, At 20ºC ambient temperature, relative humidity 65%rh, rated voltage
 3, According to IEC60068-3-5:2001 and IEC60068-3-6:2001
 4, The above specifications are for reference only.
if you have any other request ,please feel free to contact us . it can be made base on your request;thanks!!!
Â
Tubular Centrifuge Disc Centrifuge Co., Ltd. , http://www.biomass-china.com