Double Stage Vacuum Insulating Oil Regeneration Purifier/Used Oil Recondition

Double Stage Vacuum Insulating Oil Regeneration Purifier/Used Oil Recondition


The principle function of ZYD series vacuum transformer oil purifier/ oil filtration/ oil purification/ oil regeneration/ oil recovery/ oil recondition/ oil reclamation/ oil dehydration/ oil treatment machine, is the removal of water, gasses, impurities and Light hydrocarbons from oil.

The operating principle is extremely simple. The system operates under vacuum conditions. The oil is pulled through an electric immersion heater which raises the oil to an optimum temperature. The oil is then forced by atmospheric pressure into the vacuum chamber. There it passes from the Duplex 3D stereo-evaporation device, which can maximum surface area exposure and speed up water removal, the rest solid waste will be filtered by fine filter when the oil coming out of the vacuum chamber. While the oil is exposed to the vacuum, water (free, dissolved, and emulsified), dissolved gasses and air, and other low range volatiles are vaporized out of the oil, and after the last process of fine filtration, leaving a purified and conditioned oil to safe operating standards. The vaporized gasses are pulled off by a rotary vane vacuum pump through a small trap where some of the condensate is collected. The remaining vapors are exhausted to atmosphere.



Technology and advantages of this model:

1: It is for treating various insulating oil, including transformer oil, mutual inductor oil, switch oil.
2: It is widely applied in large scale manufacturing factory, power station and other related industrial fields which will use transformers, especially for over 110 KV transformers.
3: Double stage vacuum system, adopt international advanced duplex stereo-evaporation technology and UK G technology to eliminate the trace water in insulation oil and recover its breakdown voltage greatly.
4: Adopt Germany's 3 UG phase replay, can make the machine working efficaciously and safely at any situations, such as power off, lack of phase, wrong phase position, etc.
5: Equipped with advanced dielectric condensation devices for greatly prolong the oil purifier service life.
6: A trinity of interlocked preventive device is applied for avoid the machine being damaged from any accident automatically.
7: It also can be used as a separate vacuum system for dehydrating oil only, don't need to run all process and can save time and consumption for different request on oil filtration.
8: It can work onsite with the transformer running together.
9: A PLC system can be attached as per customer's requirement.
10: It can be moved easily with equipped steel wheels; It also can be designed for different structure of fully enclosed type and fully enclosed + trailer type for the purpose of outdoor use and indoor use.
11. Various color of this model can be produced just as customer's favor.

Advantages:
1. According to the transformer oil change it is very economic
2. Used transformer oil can be brought up to the equivalent point of new oil
3. Transformer within the moisture, sludge, acids and harmful gases to destroy and the insulation values will be higher than old.
4. Transformer oil life is extended.
5. As a result of the occurrence waste oil and disposal costs would have been zero.
6. Waste oil has been blocked and prevented its negative given for the environment.


Please contact us for more details.
  Double Stage Vacuum Insulating Oil Regeneration Purifier/Used Oil Recondition


The principle function of ZYD series vacuum transformer oil purifier/ oil filtration/ oil purification/ oil regeneration/ oil recovery/ oil recondition/ oil reclamation/ oil dehydration/ oil treatment machine, is the removal of water, gasses, impurities and light hydrocarbons from oil.

The operating principle is extremely simple. The system operates under vacuum conditions. The oil is pulled through an electric immersion heater which raises the oil to an optimum temperature. The oil is then forced by atmospheric pressure into the vacuum chamber. There it passes from the Duplex 3D stereo-evaporation device, which can maximum surface area exposure and speed up water removal, the rest solid waste will be filtered by fine filter when the oil coming out of the vacuum chamber. While the oil is exposed to the vacuum, water (free, dissolved, and emulsified), dissolved gasses and air, and other low range volatiles are vaporized out of the oil, and after the last process of fine filtration, leaving a purified and conditioned oil to safe operating standards. The vaporized gasses are pulled off by a rotary vane vacuum pump through a small trap where some of the condensate is collected. The remaining vapors are exhausted to atmosphere.



Technology and advantages of this model:

1: It is for treating various insulating oil, including transformer oil, mutual inductor oil, switch oil.
2: It is widely applied in large scale manufacturing factory, power station and other related industrial fields which will use transformers, especially for over 110 KV transformers.
3: Double stage vacuum system, adopt international advanced duplex stereo-evaporation technology and UK G technology to eliminate the trace water in insulation oil and recover its breakdown voltage greatly.
4: Adopt Germany's 3 UG phase replay, can make the machine working efficaciously and safely at any situations, such as power off, lack of phase, wrong phase position, etc.
5: Equipped with advanced dielectric condensation devices for greatly prolong the oil purifier service life.
6: A trinity of interlocked preventive device is applied for avoid the machine being damaged from any accident automatically.
7: It also can be used as a separate vacuum system for dehydrating oil only, don't need to run all process and can save time and consumption for different request on oil filtration.
8: It can work onsite with the transformer running together.
9: A PLC system can be attached as per customer's requirement.
10: It can be moved easily with equipped steel wheels; It also can be designed for different structure of fully enclosed type and fully enclosed + trailer type for the purpose of outdoor use and indoor use.
11. Various color of this model can be produced just as customer's favor.

Advantages:
1. According to the transformer oil change it is very economic
2. Used transformer oil can be brought up to the equivalent point of new oil
3. Transformer within the moisture, sludge, acids and harmful gases to destroy and the insulation values will be higher than old.
4. Transformer oil life is extended.
5. As a result of the occurrence waste oil and disposal costs would have been zero.
6. Waste oil has been blocked and prevented its negative given for the environment.


Please contact us for more details.
 

Motorcycles typically employ a wet clutch with the clutch riding in the same oil as the transmission. These clutches are usually made up of a stack of alternating plain steel and friction plates. Some plates have lugs on their inner diameters that lock them to the engine crankshaft. Other plates have lugs on their outer diameters that lock them to a basket that turns the transmission input shaft. A set of coil springs or a diaphragm spring plate force the plates together when the clutch is engaged.
On motorcycles the clutch is operated by a hand lever on the left handlebar. No pressure on the lever means that the clutch plates are engaged (driving), while pulling the lever back towards the rider disengages the clutch plates through cable or hydraulic actuation, allowing the rider to shift gears or coast. Racing motorcycles often use slipper clutches to eliminate the effects of engine braking, which, being applied only to the rear wheel, can cause instability.

Variator & Front Drive Pulley

Performance Gy6 50Cc Variator,Ludix Front Drive Pulley,Honda Sh125 Front Drive Pulley

SONORA MOTOR COMPANY , http://www.sonoramotor.com