Class a Intelligent Circulation Pump, High Efficiency

Technical Data

Liquid temperature range: -10 - 110°C
Pipe size: G1.5", DN25mm
Port to port length: 130mm
Max. operating pressure: 10bar
Pressure stage, pipe connection: PN10
Max flow:52l/min
Max head:6m
Max input power.: 45W
 

Specifications

circulator pump, wet rotor type, 304S.S. 
no noise <45dB(A), no leakage, environment friendly, easy installation
Energy saving hot water Circulation pump

This circulation pump especially designed for heating system and used to supply water 
and add pressure for mansions of city,villa of subarb,house,to match with industrial equipment,
to supply water in cycle for cooling air-condition,boiler and solar energy,suppy hot andwater and keep warm cycle.

Construction Material

 Motor wire:copper
 Motor shell: aluminium
 Rotor can: stainless steel 304
 Impeller: Ceramic
 Pump body: cast iron
 Shaft: S,S
 Bear: China



Company Profile

Zhejiang Lonkey Pump Industry Co.,ltd,is located in Wenling City of Zhejiang Province which is called the "Pump Town of China".Lonkey company covers a total area of 28,000 square meters.Lonkey is a professional pump manufacturer for 17 years,with modernized standard factory plants,advanced production line equipments,computerized testing&controlling machine,vacuum lacquer dripping&drying equipments and full-automatic product testing instruments.






  Technical Data

Liquid temperature range: -10 - 110°C
Pipe size: G1.5", DN25mm
Port to port length: 130mm
Max. operating pressure: 10bar
Pressure stage, pipe connection: PN10
Max flow:52l/min
Max head:6m
Max input power.: 45W
 

Specifications

circulator pump, wet rotor type, 304S.S. 
no noise <45dB(A), no leakage, environment friendly, easy installation
Energy saving hot water Circulation pump

This circulation pump especially designed for heating system and used to supply water 
and add pressure for mansions of city,villa of subarb,house,to match with industrial equipment,
to supply water in cycle for cooling air-condition,boiler and solar energy,suppy hot andwater and keep warm cycle.

Construction Material

 Motor wire:copper
 Motor shell: aluminium
 Rotor can: stainless steel 304
 Impeller: Ceramic
 Pump body: cast iron
 Shaft: S,S
 Bear: China



Company Profile

Zhejiang Lonkey Pump Industry Co.,ltd,is located in Wenling City of Zhejiang Province which is called the "Pump Town of China".Lonkey company covers a total area of 28,000 square meters.Lonkey is a professional pump manufacturer for 17 years,with modernized standard factory plants,advanced production line equipments,computerized testing&controlling machine,vacuum lacquer dripping&drying equipments and full-automatic product testing instruments.






 

Stamping Parts:

The processing method for stamping and forging are plastic processing (or pressure processing), forging stamping blank collectively. Is hot-rolled and cold-rolled steel sheet and strip. The world of steel, 60 ~ 70% is the plate, mostly made by stamping products. Automobile body, chassis, tank, radiator, boiler drum, vessel shell, electric machine, electric iron core silicon steel sheet are stamping processing. Instruments, household appliances, bicycles, office machinery, household utensils and other products, there are a large number of Stamping Parts stamping. Is powered by conventional or special punching equipment, make sheet metal in the mold directly affected by the deformation force and deformation, thus A certain shape, size and performance of the product parts production technology. The sheet metal, mold and equipment are the three elements of stamping. Temperature divided by stamping hot stamping and cold stamping. The former is suitable for high deformation resistance, sheet metal plasticity is poor; the latter was carried out at room temperature, is commonly used in stamping method the sheet metal plastic processing. It is (or pressure processing) one of the main methods, but also forming part of materials engineering. Stamping mold called stamping die, or die. The die is the material (metal or non-metal) batch processing into the special tool stamping. Die is of vital importance in the in the press, did not meet the requirements of the die, it is difficult to carry out production batch stamping die; no advanced, advanced stamping process can not be achieved. The stamping process and die, stamping equipment and stamping materials to constitute three stamping processing Only when they combine with each other can they get the stamping parts.

 

WHY Stamping:

Stamping parts and castings, forgings, a thin, uniform, light, strong character. Stamping can be produced from other methods is difficult to manufacture with stiffeners, stamping parts stamping rib, rolling or burring of the workpiece, to improve its rigidity. Because of the use of precision molds, workpiece precision, and high repetition accuracy, specifications, can punch a hole nest, boss. Cold stamping generally no longer cutting machining, or only a small amount of cutting. The hot stamping precision and surface state below the cold stamping, but still better than the casting, forging, machining less.

(1) Stamping processing is of high production efficiency, convenient operation, easy to realize mechanization and automation. This is because the stamping dies and stamping equipment rely on to complete the processing, ordinary press trips per minute up to dozens of times, high pressure per minute up to hundreds or even thousands of times, and each press stroke you may get a red piece.

(2) The stamping die ensure the dimension and shape precision stamping parts, and generally do not damage the surface quality of stamping, and die life is generally longer, so the stamping quality, good interchangeability, "as like as two peas" feature.

(3) Stamping can press the processing size range is large, complex shape parts, such as a small clock stopwatch, large car rails, covering parts, stamping and material hardening effect of cold deformation, punching strength and stiffness are higher..

(4) Stamping generally without cutting scrap generated, material consumption is less, and no other heating equipment, which is a kind of material saving, energy saving and processing, lower the cost of stamping parts.

 

Category:

Stamping is mainly according to the process of classification, can be divided into separation process and the forming process of two categories. The separation process also known as blanking, its purpose is to make the stamping parts along the contour line must be separated from the sheet, and guarantee the quality of the separation section (Table 1). The forming process is designed to make sheet metal in broken slab under the condition of plastic deformation, the workpiece into the required shape and size. In the actual production, often a variety of integrated process applied to a workpiece. The blanking, bending, shear, tensile, bulging, spinning, correction is the main stamping process of several.

Mainly speaking,based on the three different material,we can make steel stamping farts,copper alloy stamping parts and aluminium alloy stamping parts.

Stamping Parts

Stamping Parts,Steel Stamping,Copper Stamping,Aluminium Stamping

VESTA Motoring Ltd , http://www.vesta-industry.com