Automobile Car Radiator Fan Shroud Frame Housing Plastic Injection Mould
                 Plastic Injection Mould
Â
Customer: | European Customer |
Project No.: | D2XX_CSS Shroud |
Material: | PP+GF30 |
Cavities: | 1*1Cavs |
Mold Size: | 860*1500*900mm |
injection Gates: | Hot runner + 6 valve gates |
Mold main steel: | 738H+nitriding |
Lead-time: | 26 weeks(including design time). |
Â
Â
Â
In painting cubicles of e.g. the automotive industry, so-called overspray arises during the painting process. Overspray is made up of the paint which does not adhere to the workpiece and leaks out into the environment as a spray. The air contaminated with these paint droplets is routed via ventilation systems to cleaning units, such as water spray separators. These exhaust air systems frequently have a large surface area and are covered with grates set in the ground of the painting cubicles. A large percentage of this overspray collects on these grates, and in the ducts leading from them. These system have to be cleaned frequently and, in case of extensive use, even daily.
PINFL plunger pumps and complete high-pressure cleaning systems are used, with which the paint residues are removed reliably: The cleaning specialist employs high-pressure guns from Botuolini factory . These are operated with pressures between 600 and 700 bar. The advantage: The botuo high-Pressure Gun can be guided exactly so that shafts can also be cleaned accurately. Furthermore, our high-pressure guns offer an ergonomic structuring which enables safe and fatigue-free work.
ultrahigh pressure cleaning machine
ultrahigh pressure cleaning machine,ultrahigh pressure cleaner,600bar cleaning machine
ZHEJIANG BOTUOLINI MECHANICAL CO.,LTD , https://www.botuopump.com