The world's largest HDPE device put into operation in Maoming Petrochemical to fill gaps in Guangdong and is expected to ease domestic supply pressure
2021-04-02 14:04:10
On August 28th, Maoming Petrochemical's 350,000-ton/year high-density polyethylene (HDPE) plant, which is the world’s largest in terms of production capacity, was commissioned to drive. The quality of its products complied with national standards, and the safe and economic operation was successful once. The commissioning of this device fills the gap in Guangdong HDPE products and is expected to effectively alleviate the contradiction between supply and demand in the domestic market.
The 350,000-ton/year HDPE unit with an investment of over 600 million yuan has a high technological content. The core equipment such as the reactor circulating pump and the catalyst activation furnace are imported from 9 countries. The loop pipe slurry process technology from the United States Chevron-Phillips The introduction of the company, a lot of process equipment for the first time in the country, with a single-line production capacity, product variety, good quality, can produce blown plastic, film materials, drawing materials, pipe materials, injection molding plastics, cable materials, etc. more than 20 Grade HDPE varieties.
HDPE has the advantages of anti-aging, low temperature resistance, acid and alkali resistance, high crystallinity, insulation and good processing and molding properties. It has extensive applications in the fields of home appliances, electronics, textiles, etc. It is a thermoplastic product with high added value. At present, more than 60% of domestic market demand depends on imports. In particular, Guangdong's household appliances and electronics industry is relatively developed. As an important plastics processing base in the country, HDPE is in great demand. However, in the past, there was no special device to produce this type of product. It needs to be transported from abroad or dependent on imports. The commencement of production of the 350,000-ton/year HDPE unit of Maoming Petrochemical not only fills the blank of this plastic variety in Guangdong Province, but also will have an important impact on the nation's HDPE market trend.
The 350,000-ton/year HDPE unit is one of the newly built 4 units in Maoming Petrochemical's 1 million-ton/year ethylene renovation and expansion project. It was officially completed on June 30 this year. Maoming Petrochemical Chemical Division conducted technical training for employees on the scale of large-scale production of the device and new technology. In the process of driving on August 28, the entire process was opened in only 6 hours, thus achieving a successful operation.
The 350,000-ton/year HDPE unit with an investment of over 600 million yuan has a high technological content. The core equipment such as the reactor circulating pump and the catalyst activation furnace are imported from 9 countries. The loop pipe slurry process technology from the United States Chevron-Phillips The introduction of the company, a lot of process equipment for the first time in the country, with a single-line production capacity, product variety, good quality, can produce blown plastic, film materials, drawing materials, pipe materials, injection molding plastics, cable materials, etc. more than 20 Grade HDPE varieties.
HDPE has the advantages of anti-aging, low temperature resistance, acid and alkali resistance, high crystallinity, insulation and good processing and molding properties. It has extensive applications in the fields of home appliances, electronics, textiles, etc. It is a thermoplastic product with high added value. At present, more than 60% of domestic market demand depends on imports. In particular, Guangdong's household appliances and electronics industry is relatively developed. As an important plastics processing base in the country, HDPE is in great demand. However, in the past, there was no special device to produce this type of product. It needs to be transported from abroad or dependent on imports. The commencement of production of the 350,000-ton/year HDPE unit of Maoming Petrochemical not only fills the blank of this plastic variety in Guangdong Province, but also will have an important impact on the nation's HDPE market trend.
The 350,000-ton/year HDPE unit is one of the newly built 4 units in Maoming Petrochemical's 1 million-ton/year ethylene renovation and expansion project. It was officially completed on June 30 this year. Maoming Petrochemical Chemical Division conducted technical training for employees on the scale of large-scale production of the device and new technology. In the process of driving on August 28, the entire process was opened in only 6 hours, thus achieving a successful operation.
Car lifts move you and your car quickly and safely between levels. They are the preferred parking solution for homes, apartment buildings and car showrooms with a limited entrance area and a common garage space. There are three typical sub-applications: apartments and offices, residential, and showrooms. The main purpose is always to save space and costs in a safe and user-friendly solution.
Car Lift Tables,Verticle Lift Car,Rotary Car Lift,Lift For Home Garage
Marco Lift (Ningbo) Co., Ltd. , https://www.marcolift-asia.com