Sandwich Panel Foaming Machine 01
2018-06-18 03:01:05
Model NO.: PSP1+1 2+2
Model No.: PSP1+1 2+2
Type;: Polyurethane Foam Machine
Raw ;: Polyol and Isocyanate
Principle;: High Pressure Impact
Automation;: Automatic
Computerized;: Computerized
Certification;: Ce, ISO9001:2008
Voltage: 380V Other Power Customizable
Power: 40kw-100kw
Warranty: 12 Months
Trademark: ZSIM
Origin: China Zhangjiagang
HS Code: 8477800000
  HPM series high-pressure foaming machine is zhangjiagang strength and industrious Machinery Co. Ltd following the international latest high technology and according to word wide the PU industry that independent innovation high technology products .The main parts are import from foreign country, equipment technical and safely performance are reached the word wide advanced capacity. The equipment is widely used automobile industry, insulation industry, air conditioning industry, electric appliance industry and furniture industry and so on. Also, expanding the application field .
  HPM high -pressure foaming principle
  Both Polyol and Isocyanate are stored separately in two tank, and used two rotary axial metering pumps to take material to mixing head, two components injection to a small mixing room at high pressure and flow rate when mixing head started in the hydraulic control, and collide with each other instantly, pass moving transformation that reached to mixing and flow to mold control, after pouring output time that mixing head piston rod forward, all material are pushed to mixing chamber and mixing chamber is cleaned by piston rod, don't left any material. Component passed beside of piston rod return to material tank. If it don't inject in a long time , low-pressure recalculation switchover unit but two-control component into low recalculation.
 Because of equipment' exact calculation, has a small loss and needn't clean and it will be good at environment-protect and reduce the material costs. In the all areas that is to be more and more widely used.
This sandwich panel press mainly to be suitable to the polyurethane sandwich panel intermittent type Production, because uses (2+2)type, fully saved the plate pre-installed and the work piece time, enablesThis set of equipment the production efficiency large scale to enhance, simultaneously high grade highQuality carried the template also for sandwich panel production to provide the most reliable guarantee. Main technical parameter
This sandwich panel press mainly to be suitable to the polyurethane sandwich panel intermittent type Production, because uses (2+2)type, fully saved the plate pre-installed and the work piece time, enablesThis set of equipment the production efficiency large scale to enhance, simultaneously high grade highQuality carried the template also for sandwich panel production to provide the most reliable guarantee. Main technical parameter.
| Parameter | PSP620/145 | PSP820/145 OR 260 | PSP1200/145 OR 260 | PSP1500/145 OR 260 |
| Number of layers | 1+1 Â Â 2+2 | 1+1 Â Â 2+2 | 1+1 Â Â 2+2 | 1+1 |
| Mold board area | 6200*1450 | 8200*1450(2600) | 12200*1450(2600) | 15200*1450(2600) |
| Mold board closing height(mm) | 30~250 | 40~250 | 50~250 | 50~250 |
| Tact time(min) | 15~50 | 20~65 | 25~75 | 30~90 |
| Work pressure | 8~12Mpa | |||
| Heating medium temperature | 90 | |||
| Heating medium pressure | 0.25 | |||
| Power supply required | 3*380V/50HZ±10% | |||
| Total power | ~50 | ~65 | ~90 | ~110 |
Drum Dryer,Drying Machine,Drying Equipment
Tower Crane Lift Platform Co., Ltd. , http://www.tianyu-machinery.com