Radial/Bias Agricultural Farming Tractor Harvester Tire Irrigation Flotation Tyre Agriculture Implement Tyres
Product Description
Agricultural Farm Use Tractor Tyre
Agriculture tyre characters:
 1. Good tractive force and overpassing force, standing wear, suitable for driving on the soft-road.
 2. Designed with a graduated long-bar tread pattern. This bar is designed to give the shoulder an approximate 30 degree angle while the center shifts to a 45 degree angle.
  1) Machinery for manufacturing tire: Major machinery are from Germany and Italy
  2) Rubber: From Malysia, and other Green material from Europe
  3) Technology Team: 15 Engineers
  4) Rules and management: Strictly rules and management to gurantee the best product in each procedure
  5) Workers: More than 10 years working expereice in the same process to get smooth and handle all things in the right time
RadialBias Agricultural Farming Tractor Harvester Tire Irrigation Flotation Tyre Agriculture Implement Tyres
Compared to other rolling-element bearings, Slewing Bearings are thin in section and are often made in diameters of a metre or more; the slewing bearings on the Falkirk Wheel are 4 metres diameter and fit over a 3.5 metre axle. Slewing bearings resemble oversize aircraft control surface bearings.
A slewing bearing or slewing ring is a rotational Rolling-Element Bearing or plain bearing that typically supports a heavy but slow-turning or slow-oscillating load, often a horizontal platform such as a conventional crane, a swing yarder, or the wind-facing platform of a horizontal-axis windmill.
Slewing bearings often use two rows of rolling elements. They often use three race elements, such as an inner ring and two outer ring "halves" that clamp together axially.
Slewing bearings are often made with gear teeth integral with the inner or outer race, used to drive the platform relative to the base.
As for other bearings that reciprocate, rather than rotating continuously, lubrication can be difficult. The oil wedge built up in a continuously rotating bearing is disrupted by the stop start motion of slewing. Instead, a hydrostatic bearing with pumped oil flow may be used.
Slewing Bearings
Slewing Bearings,Slewing Ring Bearing,Single-Row Ball Slewing Bearing,High Precision Slewing Bearings
Ningbo Ritbearing Imp & Exp Co.,Ltd. , https://www.nbbearing.de