Prospects for Food and Packaging Machinery Industry in the Next Five Years
2018-05-13 01:00:49
one. From 2001 to 2004, China’s food and packaging machinery industry’s sales of grandmother rose from 30.18 billion yuan to 55.8 billion yuan, reaching 66.8 billion yuan at the end of 2005, 1.2 times more than five years, and the average annual growth rate exceeded 17%. Say good performance.
two. Analyze the reasons for the rapid growth:
First, the rapid growth of the food industry (average annual over 20%); Second, the GMP certification of the domestic pharmaceutical industry has stimulated the demand; Third, the technical progress of the equipment industry, to meet the requirements of most companies; Fourth, the daily chemical, building materials Demand from other industries has risen rapidly, and demand for packaging machinery is increasing. Since 2006, China will implement the eleventh five-year plan, and agriculture, rural areas, and peasants' issues concerning agriculture, rural areas and farmers will be the key issues to be resolved. The rural economy will be prospered, the income of peasants will be raised, and the employment of rural surplus labor will be in place. Very prominent. 40% of China's agricultural and sideline products are used to process food, and local processing of agricultural and sideline products will be an important way to solve the "three rural issues." Expanding the scale of processing to facilitate the use of mechanized and automated processing equipment is an important way to increase efficiency; large-scale processing can concentrate the scraps of a large number of processing industries for reprocessing, both to reduce the environmental pollution during processing and to extract a variety of traces from “scrapâ€. Elements, turning "waste" into treasure, are the best way to increase agricultural value.
As of 2004, the ratio of the output value of agriculture in developed countries to the output value of the food industry was 2.7-3.7:1, and in African countries it was 1:1, while in China it was only 0.5:1. Chinese people eat three or more meals a day. Resources are wasted, housework takes a long time, nutrition is poorly absorbed, and physical fitness is not high. Increasing the proportion of industrial food is also related to improving the physical quality of our people. The production of industrial foods depends mainly on machinery and equipment. Increasing the variety of food processing and packaging machinery and increasing its technical content are important issues during the “Eleventh Five-Year Plan†period.
As far as the grain processing industry is concerned, the first is to increase the yield rate. The grain harvest rate of grain processing equipment in China is about 2% lower than that in the developed countries. This is a huge loss for a major grain-producing country. The lack of comprehensive utilization of resources in grain processing is even more alarming. Such as rice processing, rice husk can be used to extract oil (ie, rice bran oil), rice bran oil is a health oil, the function of oil to prevent cardiovascular disease; rice bran contains more than 40 trace elements, and the drying equipment is called rice bran after extraction. It can add up to 65 times.
Maize processing, corn starch is currently done, the second is to feed directly, deep processing of corn starch can be made into glucose, core buds can be used to squeeze oil, and further can be salad oil, margarine, corn processing can also extract protein; The processed residue can be used as a feed after adding different additives. It is the best use for everything. Soybeans can be processed into soy flour, tofu, and oil, and natural vitamin E can be extracted to extract a variety of peptides. The value of its by-products is much higher than that of tofu and soybean oil. We also have many shortcomings in other food-loving machinery, such as supercritical CO2 extraction equipment, ultra-high pressure sterilization equipment, ultra-high voltage pulsed electric field sterilization, high-energy radiation sterilization, low-temperature control sterilization, membrane separation technology level is not high. These technologies are expected to enter a practical stage in China in the next five years. In particular, complete processing equipment and comprehensive utilization equipment such as rice, corn, potato, soybean, and wheat will become new growth points, and processing equipment for meat (including fish, cattle, sheep, poultry, and eggs) needs to be further improved and improved. The market is also very impressive.
three. After 20 years of efforts, packaging machinery has basically been able to meet the needs of the domestic market.
However, there is still a big gap between reliability and automation, especially for intelligent packaging machinery. Biological preservation technology, active packaging technology, barrier (barrier) technology, and antibacterial packaging technology and equipment are all international advanced today. A breakthrough in technology will bring huge market opportunities. Research institutes and production companies will need to invest huge amounts of money and technology to organize the supply of complete sets of equipment from research to equipment development.
Regarding the processing and packaging of dairy products, it is still necessary to study and improve new sterilization and preservation packaging technologies. For those processing and packaging that are only sought after by Chinese people and cannot preserve the original nutritional ingredients of dairy products, I believe there will be a correct one in the next five years. In conclusion, pasteurization equipment and recyclable packaging materials and packaging machinery will re-dominate the market after being upgraded, and 10 million tons of liquid milk will wait for new equipment to be processed and packaged.
The proportion of polymer materials with its excellent performance in packaging has been increasing year by year, and its multi-layer co-extrusion equipment, double-stretch equipment, and bottle blowing equipment have yet to be further improved. Efficient and intelligent equipment will be developed over the next five years. Taking the leading position in the market, the blow-molding equipment will develop to large scale, especially the mold manufacturing technology will be greatly improved. In the blow-molding equipment exchange, the situation of heavy dependence on imports will change. PET bottles are used to hold beer and domestic technology will have new breakthroughs.
four. With the improvement of people's quality of life, food and packaging machinery will be a sunrise industry that will never decline.
It is predicted that by 2010, annual sales of food and packaging machinery at current prices can reach more than 130 billion yuan, and exports will exceed one billion US dollars. At the same time, there are still some domestic equipment that are out of doors or whose level cannot be reached, and imports may reach 8 billion U.S. dollars. After more than 20 years of development of domestic food and packaging machinery, entrepreneurs in the industry have accumulated strong financial and technological strength. Plants and equipment are undergoing a transition to modernization. Both development capacity and manufacturing level have greatly improved. The market has accumulated a certain amount of experience, and some regions have begun to re-integrate, adjust the product structure, improve the layout of the industrial chain, increase the intensity of new product development, after 4-5 years of hard work, it is also possible to use domestic equipment to replace imports. 2 billion dollars worth of equipment.
The industry has a long way to go. It is our responsibility to equip China's food and packaging companies with Chinese equipment. Expanding the export of Chinese equipment is our pursuit. Mastering the most advanced international expertise is our goal.
two. Analyze the reasons for the rapid growth:
First, the rapid growth of the food industry (average annual over 20%); Second, the GMP certification of the domestic pharmaceutical industry has stimulated the demand; Third, the technical progress of the equipment industry, to meet the requirements of most companies; Fourth, the daily chemical, building materials Demand from other industries has risen rapidly, and demand for packaging machinery is increasing. Since 2006, China will implement the eleventh five-year plan, and agriculture, rural areas, and peasants' issues concerning agriculture, rural areas and farmers will be the key issues to be resolved. The rural economy will be prospered, the income of peasants will be raised, and the employment of rural surplus labor will be in place. Very prominent. 40% of China's agricultural and sideline products are used to process food, and local processing of agricultural and sideline products will be an important way to solve the "three rural issues." Expanding the scale of processing to facilitate the use of mechanized and automated processing equipment is an important way to increase efficiency; large-scale processing can concentrate the scraps of a large number of processing industries for reprocessing, both to reduce the environmental pollution during processing and to extract a variety of traces from “scrapâ€. Elements, turning "waste" into treasure, are the best way to increase agricultural value.
As of 2004, the ratio of the output value of agriculture in developed countries to the output value of the food industry was 2.7-3.7:1, and in African countries it was 1:1, while in China it was only 0.5:1. Chinese people eat three or more meals a day. Resources are wasted, housework takes a long time, nutrition is poorly absorbed, and physical fitness is not high. Increasing the proportion of industrial food is also related to improving the physical quality of our people. The production of industrial foods depends mainly on machinery and equipment. Increasing the variety of food processing and packaging machinery and increasing its technical content are important issues during the “Eleventh Five-Year Plan†period.
As far as the grain processing industry is concerned, the first is to increase the yield rate. The grain harvest rate of grain processing equipment in China is about 2% lower than that in the developed countries. This is a huge loss for a major grain-producing country. The lack of comprehensive utilization of resources in grain processing is even more alarming. Such as rice processing, rice husk can be used to extract oil (ie, rice bran oil), rice bran oil is a health oil, the function of oil to prevent cardiovascular disease; rice bran contains more than 40 trace elements, and the drying equipment is called rice bran after extraction. It can add up to 65 times.
Maize processing, corn starch is currently done, the second is to feed directly, deep processing of corn starch can be made into glucose, core buds can be used to squeeze oil, and further can be salad oil, margarine, corn processing can also extract protein; The processed residue can be used as a feed after adding different additives. It is the best use for everything. Soybeans can be processed into soy flour, tofu, and oil, and natural vitamin E can be extracted to extract a variety of peptides. The value of its by-products is much higher than that of tofu and soybean oil. We also have many shortcomings in other food-loving machinery, such as supercritical CO2 extraction equipment, ultra-high pressure sterilization equipment, ultra-high voltage pulsed electric field sterilization, high-energy radiation sterilization, low-temperature control sterilization, membrane separation technology level is not high. These technologies are expected to enter a practical stage in China in the next five years. In particular, complete processing equipment and comprehensive utilization equipment such as rice, corn, potato, soybean, and wheat will become new growth points, and processing equipment for meat (including fish, cattle, sheep, poultry, and eggs) needs to be further improved and improved. The market is also very impressive.
three. After 20 years of efforts, packaging machinery has basically been able to meet the needs of the domestic market.
However, there is still a big gap between reliability and automation, especially for intelligent packaging machinery. Biological preservation technology, active packaging technology, barrier (barrier) technology, and antibacterial packaging technology and equipment are all international advanced today. A breakthrough in technology will bring huge market opportunities. Research institutes and production companies will need to invest huge amounts of money and technology to organize the supply of complete sets of equipment from research to equipment development.
Regarding the processing and packaging of dairy products, it is still necessary to study and improve new sterilization and preservation packaging technologies. For those processing and packaging that are only sought after by Chinese people and cannot preserve the original nutritional ingredients of dairy products, I believe there will be a correct one in the next five years. In conclusion, pasteurization equipment and recyclable packaging materials and packaging machinery will re-dominate the market after being upgraded, and 10 million tons of liquid milk will wait for new equipment to be processed and packaged.
The proportion of polymer materials with its excellent performance in packaging has been increasing year by year, and its multi-layer co-extrusion equipment, double-stretch equipment, and bottle blowing equipment have yet to be further improved. Efficient and intelligent equipment will be developed over the next five years. Taking the leading position in the market, the blow-molding equipment will develop to large scale, especially the mold manufacturing technology will be greatly improved. In the blow-molding equipment exchange, the situation of heavy dependence on imports will change. PET bottles are used to hold beer and domestic technology will have new breakthroughs.
four. With the improvement of people's quality of life, food and packaging machinery will be a sunrise industry that will never decline.
It is predicted that by 2010, annual sales of food and packaging machinery at current prices can reach more than 130 billion yuan, and exports will exceed one billion US dollars. At the same time, there are still some domestic equipment that are out of doors or whose level cannot be reached, and imports may reach 8 billion U.S. dollars. After more than 20 years of development of domestic food and packaging machinery, entrepreneurs in the industry have accumulated strong financial and technological strength. Plants and equipment are undergoing a transition to modernization. Both development capacity and manufacturing level have greatly improved. The market has accumulated a certain amount of experience, and some regions have begun to re-integrate, adjust the product structure, improve the layout of the industrial chain, increase the intensity of new product development, after 4-5 years of hard work, it is also possible to use domestic equipment to replace imports. 2 billion dollars worth of equipment.
The industry has a long way to go. It is our responsibility to equip China's food and packaging companies with Chinese equipment. Expanding the export of Chinese equipment is our pursuit. Mastering the most advanced international expertise is our goal.