Preda Ksd High Speed Power Drills 3xd Length Wcmt
Features
1. Using seismic tool steel.
2. overall pre-hardened, re-finishing avoid secondary processing strained.
3. blades with four cutting edges, which can effectively reduce costs.
4. The special surface treatment to reduce wear and extend tool life.
Products specification
KSD Throw-away High speed  power drill bits 3XD
3xd 4xd and 5xd
DIN standard
1, Chemical Composition: 10%Co-Wc
Â
2, Raw Material: Super Micro grain with Diameter less than 0.2UM
Â
3, International Industrial Standard: K10, K05-K15, K20-K30, K20-K40
Â
4, Application areas: Machining of cast iron, nonferrous alloy, chill cast iron, hard steel, stainless steel, plastic materials, fiberglass, carbon fiber and other non-metallic.
 Â
5, Served industries: Aerospace, Transportation, Medical Equipment, Military Manufacturing, Mold Development, etc.Â
Â
Notice:
1. Drill a high-pressure center of the water, in order to increase blade life and drain well.
2. When CNC lathe machine tool center point and parallel to the spindle center right amount.
3.CNC lathe used to be boring, such as blade outer edge must be balanced turret movement angle.
Â
TYPE | Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â SIZE | Inserts | Screw | Wrench | |||||
D | d | L1 | L2 | L3 | L | ||||
C25-15-127 | 15 | 25 | 71 | 50 | 45 | 127 | WCMT030208 | M2.5 | T8 |
C25-15.5-127 | 15.5 | ||||||||
C25-16-130 | 16 | 74 | 53 | 48 | 130 | ||||
C25-16.5-130 | 16.5 | ||||||||
C25-17-133 | 17 | 77 | 56 | 51 | 133 | ||||
C25-17.5-133 | 17.5 | ||||||||
C25-18-137 | 18 | 81 | 59 | 54 | 137 | ||||
C25-18.5-137 | 18.5 | ||||||||
C25-19-140 | 19 | 84 | 62 | 57 | 140 | ||||
C25-19.5-140 | 19.5 | ||||||||
C32-20-145 | 20 | 32 | 89 | 66 | 60 | 145 | WCMT040208 | M2.5 | T8 |
C32-20.5-145 | 20.5 | ||||||||
C32-21-148 | 21 | 92 | 67 | 63 | 148 | ||||
C32-21.5-148 | 21.5 | ||||||||
C32-22-151 | 22 | 95 | 71 | 66 | 151 | ||||
C32-22.5-151 | 22.5 | ||||||||
C32-23-155 | 23 | 99 | 74 | 69 | 155 | ||||
C32-23.5-155 | 23.5 | ||||||||
C32-24-159 | 24 | 103 | 78 | 72 | 159 | ||||
C32-24.5-159 | 24.5 | ||||||||
C32-25-163 | 25 | 32 | 107 | 81 | 75 | 163 | WCMT050308 | M3 | T8 |
C32-25.5-163 | 25.5 | ||||||||
C32-26-170 | 26 | 110 | 83 | 78 | 170 | ||||
C32-26.5-170 | 26.5 | 111 | 84 | ||||||
C32-27-173 | 27 | 113 | 86 | 81 | 173 | ||||
C32-28-177 | 28 | 117 | 89 | 84 | 177 | ||||
C32-29-180 | 29 | 120 | 92 | 87 | 180 | ||||
C32-30-185 | 30 | 125 | 96 | 90 | 185 | ||||
C32-31-189 | 31 | 32 | 139 | 99 | 93 | 189 | WCMT06T308 | M3.5 | T15 |
C32-32-192 | 32 | 132 | 102 | 96 | 192 | ||||
C32-33-196 | 33 | 136 | 105 | 99 | 196 | ||||
C32-34-199 | 34 | 139 | 108 | 102 | 199 | ||||
C32-35-203 | 35 | 143 | 111 | 105 | 203 | ||||
C32-36-203 | 36 | 143 | 111 | 108 | 203 | ||||
C32-37-210 | 37 | 150 | 117 | 111 | 210 | ||||
C32-38-214 | 38 | 154 | 120 | 114 | 214 | ||||
C32-39-217 | 39 | 157 | 123 | 117 | 217 |
Package Image
Â
Cnc Turning is namely Lathe machining, Lathe machining is a portion of mechanical processing.
Lathe machining is always a process that turning tools doing turning machining to a rotary workpiece. On CNC lathes, the operators or the engineers also can use drills, reamers, screw taps, threading dies and knurling tools to make relative machining work. CNC Turning is usually applied to machining shafts, plates, bushings and all other workpieces which have rotary surfaces, it is a very widely application in practical mechanical manufacturing.
CNC turning can be divided into rough turning and finish turning, rough turning is for the purpose of machining with big cutting depth and big feed rate, to improve the machining efficiency. However, the precision of rough turning can only be grade IT11, the surface finish can only be Ra 20-10um. On the contrary, semi-finish machining and finish machining usually can only apply high speed but small feeding rate and cutting depth. In this condition, the machining accuracy can be up to grade IT10-7, the roughness can be Ra10-0.6um.
CNC Turning
Cnc Turning,Cnc Machining Parts,Die Casting,Aluminum Castings
NINGBO ZHENHAI BOLANG METAL PRODUCT FACTORY , http://www.blcastings.com