Mistakes in the use of laptop batteries that may not be known to you

When we use the notebook, we often have some misunderstandings. Let me first give you some wrong ways to use the battery. I hope everyone can avoid it in time.

1. Unplug the power after fully charged

In the case that the laptop battery is fully charged, the laptop should not be used with an external power source. Since the notebook computer is used in the case of loading a battery, the battery is actually in a state of repeated charging at this time. In addition to reducing the battery life, the use of AC and battery at the same time will also cause the machine to overheat and easily damage other components.

2. Do not use the battery for a long time

Although the battery should not be used when the external power supply is connected, it is not correct to not use the battery for a long time. The battery capacity needs to be activated periodically, and proper use is more accurate. In particular, every time you use the battery, you should pay attention to the battery to run out and recharge, and try not to unplug it when it is not fully charged. After the battery is fully charged, you should use the battery or power adapter separately, not the two.

3. Always remove the battery

Do not remove the battery often, expose the battery position, so it is easy to enter a lot of dust and cause poor contact when using the battery. When disassembling the battery, you should pay attention to dust, water, moisture, moisture and shock. Regularly clean the position with a small brush.

MX- Wet and Dry type scrap cable/wire/plug recycling machine  (Cable granule separation equipment)- To process waste cable and wire. Get the copper separated from waste cable and wire through crushing and gravity separation process, no copper at plastics and no plastics at copper. No incineration and pollution. It is in compliance with EHS standard, no harmfulness to workers, eco-friendly solution for waste recycling.
Automatic process, stable performance, easy for operating, easy to maintenance, high recycling rate. Patent number:  201120415640.0.                                                                         Jiangxi Mingxin developed wet and dry type scrap cable/wire recycling machine use copper fine Crusher Machine to solve the above problems, the first dry separation and then by wet separation, the larger copper particles selected automatically by dry separation, the hair copper wire is automatically selected by wet separation, the recovered higher quality copper, but also to achieve a better recovery rate (over 99%), the entire process automatically, you can use less labor to achieve higher production.

Copper Cable Wire Recycling Machine

Copper Cable Wire Recycling Machine,Dry Copper Wire Recycling Machine,Wet Copper Wire Recycling Machine,Copper Wire Recycling Machine

Jiangxi Mingxin Resource Recycling Co.,Ltd , http://www.weee-china.com