Jiangsu Jiesheng windlass 2 boat sets electric hydraulic steering gear successfully delivered
2019-12-27 15:05:28
September 21, Jiangsu Co., Ltd. Jiesheng windlass made two ships set 12kN · m electro-hydraulic steering gear by Zhenjiang emerging shipbuilding companies, ship owners, design institutes, ship inspection inspection and smooth delivery. The 12kN·m electro-hydraulic steering gear is equipped with electric steering, handwheel steering and manual emergency steering functions, all of which can be steered on the control console or console; and has power loss, phase loss, overload, low liquid level, oil return filter Sound and light alarms such as blockages. This type of electro-hydraulic steering gear has the advantages of high integration, few fault sources, safety and reliability, sensitive operation, and easy maintenance and maintenance.
According to Chen Gong, each 12kN·m hydraulic steering gear has one hydraulic station. Each pump station has one motor and one oil pump. The system configuration is exquisite, and the inland watercraft is economical and cost-effective. The specifications and technical parameters of the delivered servos are as follows:
Nominal torque: 12kN·m
Rudder time: ≤20S/65° (35° from one side to 30° on the other side, single pump)
Ruil angle: ±35° (limit angle: ±36.5°)
Rudder radius: 200mm
Number of rudders: Double rudder Type of rudder device: Pendulum type Maximum working pressure 8.5Mpa
Safety valve adjustment pressure: 10.6Mpa
Control form: Electric control Oil pump unit: è´° set of oil pump units, each other for standby.
The hydraulic oil grade is recommended to be N32 thickened low-condensation hydraulic oil.
Due to the short shipbuilding period of the shipyard, the ship type parameters and equipment parameters were confirmed several times after the contract was signed. In the design process, Jiangsu Jiesheng Bolting Machine personnel actively and actively communicated with the design institute/shipyard to communicate with the requirements of the steering gear in the spirit of overwhelming and high-precision, confirming that the parameters are correct and correctly completed the 12kN according to the requirements of the shipyard. m Electric hydraulic swing cylinder steering gear production. The shipowner and shipyard are very satisfied with the appearance, finishing, assembly and manufacturing details of the marine steering gear supplied by Jiangsu Jiesheng, and the preparation of the random data.
Nominal torque: 12kN·m
Rudder time: ≤20S/65° (35° from one side to 30° on the other side, single pump)
Ruil angle: ±35° (limit angle: ±36.5°)
Rudder radius: 200mm
Number of rudders: Double rudder Type of rudder device: Pendulum type Maximum working pressure 8.5Mpa
Safety valve adjustment pressure: 10.6Mpa
Control form: Electric control Oil pump unit: è´° set of oil pump units, each other for standby.
The hydraulic oil grade is recommended to be N32 thickened low-condensation hydraulic oil.
Due to the short shipbuilding period of the shipyard, the ship type parameters and equipment parameters were confirmed several times after the contract was signed. In the design process, Jiangsu Jiesheng Bolting Machine personnel actively and actively communicated with the design institute/shipyard to communicate with the requirements of the steering gear in the spirit of overwhelming and high-precision, confirming that the parameters are correct and correctly completed the 12kN according to the requirements of the shipyard. m Electric hydraulic swing cylinder steering gear production. The shipowner and shipyard are very satisfied with the appearance, finishing, assembly and manufacturing details of the marine steering gear supplied by Jiangsu Jiesheng, and the preparation of the random data.
3 Axis Cantilever Waterjet Cutting Machine
Water Cutting Machine,Waterjet Cutting,Waterjet Cutter Machine,Small Waterjet Cutting Machine
FOSHAN YUANLI PRECISION MACHINERY CO.,LTD , https://www.ylwaterjet.com