How to reduce the failure of laser cutting machine
With the economic development, people have developed laser cutting machines. Laser cutting machine is a modern high-tech product, widely used in all walks of life, most companies use the laser cutting machine for a short time, so it is not a good thing for the laser cutting machine itself. As long as the machine is running, it can play its role. In the process of using, we must regularly perform some maintenance work and maintenance on the laser cutting machine so that the laser cutting can maintain good performance. In the process of using, it is easy to have some problems. This will reduce the working efficiency of the laser cutting machine, so we need to regularly maintain the laser cutting machine.
1. The condenser, ventilation, and filter maintain the best state of the system. Then we must perform dust removal on the three components of the condenser, ventilation, and filter. Take the filter of the cutting machine from both sides, use a certain amount of detergent and water to remove the dust on the filter, clean it once more, then dry it.
2, pure water filter For pure water filter, we have to regularly filter or replace the filter.
3. In the process of using the laser cutting machine, we need to periodically check that there is no need to add water. In the cutting machine, the water in our tank needs to cover the coil in the tank. If the water is lower than the coil, we add the medicine. add water. The water quality in the cutting machine is also very important, so we need to replace the water in the cutting machine regularly. When the pump water volume decreases during use, this is because the air in the water pump body causes the water volume to become smaller. At this time, you need to press. The red button on the water filter removes air from the water system and waits until the water flow is normal.
In order to reduce the failure of the laser cutting machine, we need to maintain the cutting machine to reduce the failure during use.
The air-to-air cooler is mainly used in various air, high-humidity air, mixed gas of various media, etc., and the air cooling method is adopted to cool the high-temperature air passing through the heat exchanger.
Advantages: Strong corrosion resistance, compact structure, small footprint, and high degree of customization.various air-cooled drive modes, DC motor, AC motor, hydraulic motor, air motor, special explosion-proof motor, etc., better to choose the appropriate drive mode according to industrial environmental factors, without the help of external cooling medium, lower The hardware requirements can be used to cool the oil and ultimately ensure the benign operation of the equipment.
Applications:Construction machinery engines, automotive engines, air compressors, industrial spray equipment, new energy equipment, electrical equipment, marine equipment, wind power equipment, etc.
Air-Air Cooler,Air Air Cooler,Evaporative Air Cooler,Symphony Air Cooler
Xinxiang Zhenhua Radiator Co., Ltd. , http://www.thermictransfer.com