How to prevent rust and corrosion of spray vehicles

The realization of the improvement in the governance of our living environment by the national and local governments has continued to increase, especially in recent years. The sanitation department has made many efforts in the greening of urban areas and the dust reduction of urban roads. The environment has also changed a lot. It really made a great contribution to our city's greening and road dust-falling work on our spray trucks. However, we understand that the sanitation department and industrial and mining enterprises will seriously cause rust and corrosion in the tanks within a few years. Many spray trucks cannot be used and maintenance requires high costs. Why is the tank not used for a long time? In fact, many people did not do enough to prevent the rust and anti-corrosion work of the spray truck during use. This caused the tank to be damaged. So today Xiao Bian explained to you how to prevent the spray truck. Some knowledge of rust anti-corrosion.

1

1. The tanks of sprinklers are generally made of carbon steel. It is easier for anyone to meet the rust. Users must carry out a rust-proof maintenance on the tanks every year. Every three years, sprinkler trucks are used. Carry out an anti-corrosion maintenance (pesticide spraying vehicle once a year), the price is also relatively cheap, a maintenance of about one thousand yuan.

2. Green Sprinklers Customers can paint the inside of the tank and the surface with some rust-preventing paints and painted anti-corrosion paints.

3, try to avoid loading seawater during the process of loading water, because it will reduce the service life of the tank.

4, after the use of the sprinkler, be sure to shoot out the remaining water in the tank, can also reduce the rust inside the tank;

5, after use must not be placed in the open air sprinkler, to prevent raining, must be placed in a moisture-proof, cool place.

6. If it is found that the inside of the vehicle tank is rusted, it is necessary to take correct rust removal measures, and the rust is discharged out of the tank to prevent blockage of the pipeline and carry out rust preventive maintenance.

The above six points are about some measures to prevent rust and corrosion of spray trucks. I believe everyone will have a deeper understanding of the anti-corrosion work of tanks after reading them. I hope to help everyone and thank you all for working on sanitation. Made a contribution.


Activated Carbon Production Equipment includes activation furnace and Carbonization Furnace.

The working principle of continuous coconut shell carbonization furnace,which is adopting advanced smoke-free and environment-friendly carbonization process.
 The whole set of equipment consists of four parts:1.incineration system
2. Purification system
3. Carbonization system
4. Control system
 The system has applied for a number of patents, environmental protection, time saving, labor saving and energy saving.
Rotary carbonization furnace

The activation method of the Slep Furnace is a method of activating the steam and flue gas alternately. The SLEP Furnace is mainly composed of the furnace body, the regenerator, the water seal, the feeder and the chimney.
It is suitable for the production of various kinds of granular carbon, the process conditions are stable, the quality of the product is uniform, the adsorption performance is good, the production of various advanced activated charcoal, big production capacity , the mechanical automation can be realized, the fuel is not needed, long furnace life  and so on. So it is widely used in the production of international granular activated carbon. 
SLEP

Rotary activation furnace is an internally heated fluidized bed continuous production activation furnace. The activator is water vapor and flue gas. This method is also used in the production of wood charcoal.

Rotary activated furnaceActivated Carbon Regeneration Furnace is an external indirect heating mode, which is composed of roller, transmission and support mechanism, heating furnace and smoke exhaust device, measurement and control system, feeding mechanism and feeding device, discharging device and sealing device. The aim is to reactivate the used activated carbon for two times.

Activated carbon regeneration furnaceOne-step vertical activation furnace material is put into operation once, which saves time and effort and saves less investment. It is a kind of activation method of alternating activation of water vapor and flue gas. It can realize mechanical automation, without fuel and long service life, so it is widely used in the production of international granular activated carbon.

One-step vertical activation furnace

If you have any questions, please contact with us directly.Welcome you can visit our Factory.For inqury,Please send mail directly to us.

Activated Carbon Production Equipment

Rotary Activated Furnace,Rotary Carbonization Furnace,Slep Furnace,One-Step Activation Furnace

Shandong Hengyi kaifeng Machinery Co.,Ltd , https://www.xhykf.com