Automotive lighting design and manufacturing continue to integrate LED technology

When it comes to LED technology, lighting is one of the important applications in addition to the display screen. In addition to the increasing use of traditional home and public lighting for LEDs, automotive lighting design and manufacturing are beginning to incorporate LED technology.
LED lights refer to the lights that use LEDs as the light source. LEDs are widely used in the automotive field because of their high brightness, rich color, low power consumption and long life.
In 2012, the global automotive traditional light source lighting accounted for about 10 of the total output of the entire lighting source, so the automotive market is the most promising LED lighting segment. LEDs have been applied to the interior and exterior of automobiles, especially in automotive interior lighting. The application of color LEDs is very mature, such as instrument lights, backlight switches, car reading lights or head-up display systems; outside the car, mainly combined LED Tail lights, such as brake lights, turn signals, and parking lights. Manufacturing experts believe that by 2013, all taillights of the world will be led by more than 95 taillights. The overall market size of automotive led taillights will reach an annual output value of 2.3 billion yuan.
In addition, the future development market of automotive taillights will also change. Demand in the European market will no longer be strong, and the global 80 LED taillight products are sold to emerging markets such as the Middle East and South America. The market share of automotive taillights from emerging markets such as South Asia, Latin America, Oceania and the Middle East will increase exponentially.
At present, the main manufacturers of LED car lights are: Philips Lighting, Lighting Technology, Huicheng Optoelectronics and other professional manufacturers. With the continuous updating of LED technology and the development status and trend of LED lamp technology, China's LED high-position brake lamps will be further popularized, prices will drop steadily, LED rear brake lights, turn signals and fog lights will begin to be commercialized, LED vehicles The lamps will be developed in a personalized and artistic manner, and the LED intelligent control system will also develop rapidly.

The internal structural design is vane, Vane Damper is  more suitable for soft close. ABD vane dampers are used to dampen drives, control speed, and many other applications. The damping direction of the vane dampers with continuous rotation can be clockwise, counter clockwise, or in both directions. Vane dampers are widely used in automobile interior decoration, household electric appliances, furniture and bathroom products, etc. Our dampers can make the movement of structures soft, quiet and safe to mitigate the impact, avoid the damage, increase the mechanical life, reduce noise, and improve product quality.

NOTE:

1. Please contact the corresponding product engineer for specific torque products.

2.The Standard of completion closing:the angle is 90° between Shaft A and Shaft B.

3.It is closing position to assemble the shaft into the housing.

4. Max. cycle rate: 3 cycles/min(Clockwise110 °, 110 ° anti-clockwise for 1 cycle)

5.Operating temperature:0~40℃

6.Storage temperature:-10~60℃

Soft closing time test: Measure the closing time from angle 70 to 0.

Rated Torque (T).

Test Temperature: 23±2℃.

Durability test:

Test Method: From the closing position to opening position, push back to 70°, soft close from 70° to 0°.

Rated Torque (T).

Operation Angle: 0°~110°.

Test Temperature: 23±2℃.

Durability test cycle: 50,000 cycles. The result of product test )>2s.

 

 

Vane Damper

Vane Damper,High Temperature Dampers,Toilet Seat Vane Damper,Soft Down Damper,Storage Boxes Vane Damper

Shenzhen ABD Equipment Co., Ltd. , http://www.abddamper.com