Automatic Electric Vegetable Slicing Machine (slice, shred, dice, fillet)
Automatic electric vegetable slicing machine(slice,shred,dice,fillet)
Main technical parameters of multi-functional vegetable cutting machine:
1.Cut into chunks:
Use special tool to cut stem material.The section length of the cutting material can be adjusted between 2-30mm.
2.Cutintopieces:
Use special cutting tool to cut material into 10*10-25*25mm
3.Cut into shreds:
Cut the material into wire with special cutting tool.The cut section is 3*3-10*10mm, with a length of 30mm (shred, dice, carrots).
4.Cutting tool Angle cutting:
Change the cutting tool and chute feeder installation Angle can be cut 30° to 45°oblique.The two kinds of cutting methods: horizontal and oblique cut.
5. Production: 500-2000kg/h.
6. Appearance: 1200*800* 1350mm, feeding tank 140*1000mm.
7. You can customize various knives.
Basic parameters of automatic cutting machinery:
Specifications: Rd-cp-800
Dimensions: 1200*800*1350mm
Material: stainless steel
The electric voltage: 380 v/220v
Power: 1.5 kw
Main use of vegetable cutter:
It is suitable for all kinds of vegetable processing in food industry such as dehydration, quick-freezing, fresh and pickling etc.
Cut into chunks: such as shallots (chives), leeks, leeks, celery, cilantro, peas, and beans;
Cutintopieces:Cabbage, olives vegetable, spinach.
Slice:yam, bamboo shoots and burdock.
Cut into shreds:potato,carrot,radish,lotus root.
Â
Automatic electric vegetable slicing machine(slice,shred,dice,fillet)
Main technical parameters of multi-functional vegetable cutting machine:
1.Cut into chunks:
Use special tool to cut stem material.The section length of the cutting material can be adjusted between 2-30mm.
2.Cutintopieces:
Use special cutting tool to cut material into 10*10-25*25mm
3.Cut into shreds:
Cut the material into wire with special cutting tool.The cut section is 3*3-10*10mm, with a length of 30mm (shred, dice, carrots).
4.Cutting tool Angle cutting:
Change the cutting tool and chute feeder installation Angle can be cut 30° to 45°oblique.The two kinds of cutting methods: horizontal and oblique cut.
5. Production: 500-2000kg/h.
6. Appearance: 1200*800* 1350mm, feeding tank 140*1000mm.
7. You can customize various knives.
Basic parameters of automatic cutting machinery:
Specifications: Rd-cp-800
Dimensions: 1200*800*1350mm
Material: stainless steel
The electric voltage: 380 v/220v
Power: 1.5 kw
Main use of vegetable cutter:
It is suitable for all kinds of vegetable processing in food industry such as dehydration, quick-freezing, fresh and pickling etc.
Cut into chunks: such as shallots (chives), leeks, leeks, celery, cilantro, peas, and beans;
Cutintopieces:Cabbage, olives vegetable, spinach.
Slice:yam, bamboo shoots and burdock.
Cut into shreds:potato,carrot,radish,lotus root.
Â
Double Wheel Concrete Pile Spinning/Centrifugal Machine:
Double Wheel Concrete Pile Spinning/Centrifugal Machine is mainly apply to produce High strength centrifugal technology concrete spun piles of difference diameter and length, Prestressed Reinforced concrete pole(SPC pole) by spinning formed. According to customer's effeciency request, there are Single wheel spinning machine and Double wheel spinning machine at customer's option, it is equipped with a stepless speed-variation motor and a control panel, it works smoothly and its speeder is of wide-range. Its box base is sturdy and durable and easy for installation.
Our Pile Spinning Machine's Advantages:
1. Unique "slot" design, change the screw limit between the bearing support and the base plate with the card slot and bolt limit. Both up and down sides of the spinning machine panel, undersurface and two sides of bearing support go through fine machining. Though the process is complex, it makes it more solid during high-frequency vibration of bearing support and the floor. Repair and replacement also have interchangeability.
2. Connection shaft is whole shaft, to avoid stress concentration brought by shaft diameter changes, resulting in the phenomenon of "shaft-broken".
3. The limit side of the support wheel is removable. It is convenient for users to replace.
4. Frequency-conversion cabinet of spinning machine records process parameter of each pipe and output reports, provides the office computer data communication interface.
Spinning Machine Technical Parameter:
Wheel Distance(mm) |
2000 |
Central wheel Distance(mm) |
950-1200 |
Wheel Diameteri(mm) |
600 |
Axle Diameter(mm) |
110-125 |
Automatic controller for centrifugal concrete pile machine |
|
We can customize for you. If you have any questions, please contact with us. Welcome you can visit our Factory.For inqury,Please send mail directly to us.
Concrete Double Wheel Spun Pile Spinning Machine
Piling Machine,Concrete Double Wheel Spinning Machine,Double Wheel Centrifugal Spinning Machine,Wheel Centrifugal Spinning Machine
Jiangsu Haiheng Building-Materials Machinery Co.,Ltd , https://www.jshaiheng.com