Analysis of Two Braking Types of Small Cement Mixer
Small cement mixers have two types of brakes, which are foot brakes and hand brakes. The purpose of use is to brake, so what are the differences in performance between the two? The handbrake of a small cement mixer is what people usually call a parking brake. The literal meaning is to say that when a small cement mixer needs to stop, the brake device can keep the vehicle stationary, and the parking brake is only two. The rear tyres of a mixer truck are generally used for parking between three hours and five hours. Some new drivers also need to use the handbrake to start uphill.
The foot brake is the so-called service brake of a small cement mixer. The meaning of the explanation is that when the small cement mixer is in the driving process, it needs the brakes needed to decelerate the mixer until it is completely still. The device, to put it simply, is that everyone temporarily stops the use of small cement mixers and is used in the action of deceleration and the like. When the brakes are braked, four wheels instead of two are braked.
When using the hand brake of a small cement mixer, it is usually necessary to wait until the mixer is completely stationary before it can be used. Therefore, the force used when using the handbrake will not be very large. The handbrake is used to carry out the use of steel cable. controlling. The professional name of the handbrake of a small cement mixer is called the auxiliary brake. The operating principle between the auxiliary brake and the brake is not the same. The braking method it uses is connected to the rear brake shoe with a wire cable, and then The mixer brakes. When the agitation is in the driving process, the power and the inertia are relatively large. If it is necessary to reduce the speed, it takes a lot of effort to be able to apply the braking effect after the foot brake is depressed.
The difference between the foot brake and the handbrake of the small cement mixer is simply that the foot brake is generally used when the vehicle is braking down and running, and the handbrake is mainly used when parking. of. Both kinds of brakes can play a braking effect, but the braking effect that the foot brake plays in the course of driving the vehicle is quite remarkable. However, the use of a handbrake during the driving of the vehicle does not achieve a good braking effect.
Rolling-element bearings are a precision, yet simple, mahine element of great utility. The purpose of a bearing is to provide relative positioning and rotational freedom while transmitting a load between two structures, usually a shaft and a housing.
Roller Bearing
Roller Bearing,Steel Cage Roller Bearing,Brass Cage Roller Bearing,Spherical Roller Bearing
Xibei Bearing Co.,Ltd. , https://www.nxzjck.com