With the continuous emergence of emerging products, various emerging devices have emerged in the market. As a kind of technical equipment, the shaking incubator is currently favored in many fields. It can not only provide convenience for production in terms of function, but also bring beneficial effects for the progress of science and technology. The shaking incubator is different from the constant temperature incubator. It needs to be familiar with a lot of operational problems in the specific use. Only by fully mastering the skills of use, can it bring efficiency to production. Let's take a look at the use of the shaking incubator.
Use and explanation of shaking incubator
First, the shaking incubator should be properly placed when it is not in operation. The best storage location should be a ventilated place, so as to effectively ensure the performance of the shaking incubator. It should also be kept dry and clean. Before use, the control switches on the panel shall be in non-operating state; place experimental samples on the culture rack, and keep a proper interval between the test bottles (or vessels) during the placement to facilitate convection and circulation of hot and cold air; Turn on the power switch, turn on the power switch, and the indicator lights up.
Second, in the specific operation, we should also use different temperatures and speeds for different problems. To a certain extent, this requires us to conduct professional training on the speed control of the temperature conversion box. We can directly select the desired temperature according to the instruction manual of the intelligent temperature controller. When the actual temperature of the box is lower than this value, it will automatically heat up; when the temperature inside the box is higher than this value, it will automatically cooling and cooling, the instrument will automatically control the temperature; but also according to the operating instructions of the intelligent speed controller, choose your The speed and time required.
It can be seen that, in the specific use of the shaking incubator, employees can only benefit from the production process if they fully understand its operation method. I believe that on the road of continuous development, it will also achieve a broader world.
The guide wheel also includes a number of steady flow grooves; a number of steady flow slots are centered around the center of the impeller and set at the edge of the impeller with the side of the flow guide. Each steady flow slot is set between the two diversion channels, and the direction of the channel extension of each steady flow groove is the same as the extension direction of the channel body adjacent to the flow channel; the steady flow trough depends on it. The distance from the center of the impeller to the edge of the impeller is larger than the distance between the center of the impeller and the edge of the impeller.
1000Series Impeller And Diffuser
1000Series Impeller And Diffuser,Diffuser,Pump Impeller And Diffuser,Impeller Volute And Diffuser Interaction
Tianjin RongHeng Group LLC , http://www.wholesale-water-pump.com