4" Aluminum Emergency Bottom Valve for Oil Tank (C804CQ-100)

Specifications

1.Material : Aluminum Alloy
2.Nominal Diameter :3 "
3.Pressure :0.4Mpa
4.Open mode:Pneumatic/chiral dual use
 

1. Vapor Vent Valve    C802A-80

 

  To install in the Manhole Cover or on the top of the Tanker.The exit side is connected with the rubber hose to the vapor recovery pipework. When the tanker is loading or unloading to control the vapor comes in or out the tanker.This is a very important component for the vapor recovery system.Vapor Vent Valve is installed on the manhole cover or on the top of the tanker.Exit end is connected with the rubber hose to the vapor recovery pipework.When the tanker is loading or unloading,vapor vent valve control the vapor to come in or out of the tanker.It is very important component for the vapor recovery.
 

 

2. Benefit and Feature
 

 *Special surface treatment

Aluminum alloy surface is treated by oxidation to improve the anti-corrosion.
 

 * Hardening Treatment

The whole valve body is passed a special hardening process to improve its service life.

 

 * Easy-Operation

Sequence control to control the current valve open to series control the next valve open.

 

 * High Quality

The stainless steel internal shaft parts ensures its corrosion resistance.

 

 * Light Weight

The main body is made of aluminum alloy,it is more light and sturdy.

 

 * Tight Sealing

Effectively guarantees the tanker do not overflow after rollover.

 

3. Installment drawing







 

Specifications

1.Material : Aluminum Alloy
2.Nominal Diameter :3 "
3.Pressure :0.4Mpa
4.Open mode:Pneumatic/chiral dual use
 

1. Vapor Vent Valve    C802A-80

 

  To install in the Manhole Cover or on the top of the Tanker.The exit side is connected with the rubber hose to the vapor recovery pipework. When the tanker is loading or unloading to control the vapor comes in or out the tanker.This is a very important component for the vapor recovery system.Vapor Vent Valve is installed on the manhole cover or on the top of the tanker.Exit end is connected with the rubber hose to the vapor recovery pipework.When the tanker is loading or unloading,vapor vent valve control the vapor to come in or out of the tanker.It is very important component for the vapor recovery.
 

 

2. Benefit and Feature
 

 *Special surface treatment

Aluminum alloy surface is treated by oxidation to improve the anti-corrosion.
 

 * Hardening Treatment

The whole valve body is passed a special hardening process to improve its service life.

 

 * Easy-Operation

Sequence control to control the current valve open to series control the next valve open.

 

 * High Quality

The stainless steel internal shaft parts ensures its corrosion resistance.

 

 * Light Weight

The main body is made of aluminum alloy,it is more light and sturdy.

 

 * Tight Sealing

Effectively guarantees the tanker do not overflow after rollover.

 

3. Installment drawing







 

Side Loader Garbage Truck is used in various sanitation municipal and large-scale factories and mines to carry various types of garbage. They can also transport bulk construction materials such as ash, sand, stone and earth, and can also transport ore or coal in mines or coal mines. It is composed of a sealed garbage compartment, a hydraulic system, and an operating system. The lifting oil tank (2 pieces) can be put down from the lift and the working cycle time is ≤50S.

The characteristic of the hanging garbage truck is that one vehicle can be equipped with dozens of garbage cans, which can realize the joint operation of a single vehicle and multiple garbage cans and recycle transportation, which fully improves the transport capacity of vehicles, and is particularly suitable for short-distance transport, such as the sanitation department. The cleanup and transportation of urban garbage.

Side Loader Garbage Truck

Automated Loader Garbage Truck,Bruder Garbage Truck,Small Garbage Trucks,Side Loader Garbage Truck

Hubei Liwei Automobile Co.,Ltd , http://www.hltq.com